Dimensions: 12” High 7” Wide
10.5” Deep

Premier Series K7

Snell Signature Series loudspeakers - K7

Is BiggerAlways Better?...Can Speakers Be Beautiful The Snell Series 7 loudspeakers reveal the depth, impact and nuance in every music and movie soundtrack without the obtrusive look and placement conflicts of typical speakers. Handcrafted in Massachusetts from real wood and solid aluminum, the elegant Series 7 with its soft lines and superb finish plays perfect host to the technology inside.

K7 Style and room architecture play a bigger role in home entertainment decisions than ever before.The smallest of the Series 7,the K7 is designed to perform,regardless of placement,and integrate with most decor. Based on newly developed, high performance drivers from SEAS,and (quite) a bit of magic from Snell ’s chief engineer, Joe D ’Appolito Ph.D., the K7 betters its award winning predecessor, the K.5mk2,in half

the physical size. Fine tuned with an individually calibrated crossover, the shoe-box sized K7 plays music and movies at concert hall levels, with startling dimension and clarity.

Application Alternatives:

System Suggestions:
IW-K7 In Wall
Basis150 Subwoofer CR7 Center SR30 Surround

Like all Snell loudspeakers, each K7 is hand tuned for natural imaging and sonic depth.

Design:

Tweeter

Boundary compensation

End Caps

Bass Reflex Monitor

1-inch SEAS silk dome

"Normal" – When placed on

1/4" inch aluminum,

with Rear Port

 

stands away from wall.

anodized black

(port requires 1.5" to back-wall)

Woofer

"Boundary"– When placed on

 

 

5.25-inch SEAS Treated Paper,

shelf or near wall.

Grille

Frequency Response

5 mm Excursion

 

Perforated Steel with black

54Hz-20kHz ± 3dB

 

Wiring

powder-coat paint.

77Hz-20kHz ± 3dB

Video Shielding

Bi-amp, bi-wire ready

 

@ 12dBOctave w/ Port Plug

Yes

 

Finishes

 

 

Connections

Hand-sanded natural Cherry.

Sensitivity

Crossover Frequency

5-way, satin nickel-plated, brass

Black-painted Walnut. Can

[1 Watt (2.83v) @ 1m]

2.5 kHz

terminals. Accepts 5/16's

be ordered in most wood

87 dB

 

spades, pins, banana plugs and

and paint finishes.

 

Crossover

bare wire to 12 gauge.

 

Impedance

Discrete Tweeter and Woofer

 

Weight

Nominal 8 Ohms

circuit boards. Time alignment and

Cabinet Construction

17 lbs.

 

coherency are achieved through

Hardwood veneer over 5/8-inch

 

Maximum Output

the transition region from driver to

MDF Panels. Full length brace

 

105 dB

driver. Each crossover is

with integrated port flare.

 

 

individually tuned by our

Radiused 1.25-inch satin-black

 

Recommended Power

technicians to ± 0.5db of the

MDF baffle.

 

50 Watts minimum

Master Reference.

 

 

150 Watts maximum

 

 

 

Manufactured in the USA by Snell Acoustics, Peabody MA 01960 • www.snellacoustics.com • 978-538-6262 • © Snell Acoustics, Inc • All specifications subject to change without notice.