SAFETY FEATURES
This heater is equipped with a
Overheat Safety Feature
This heater is equipped with a overheat safety feature. When the heaters internal components reach a certain temperature that could cause overheat and possible fire, the heater will automatically shut off. To reset the heater, unplug the heater power cord from the electrical outlet for 10 minutes. After 10 minutes, plug the heater into the electrical outlet and turn on using the supplied remote control or the control panel on the heater.
ALCI Safety Plug
This heater is for use on 120 volts. This cord is equipped with an Appliance Leakage Current Interrupter. This plug has a “reset” button and the “test” button. This safety plug will trip when there is a leakage of current between the heater and the electrical outlet. If the unit is plugged in and not working, unplug the ALCI plug and press the reset button. This will reset the ALCI safety feature, and the heater will now function properly.
Polarized Plug
Warning: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the out- let, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
WARNING: It is normal for the power cord to feel warm to the touch; however, a loose fit between the outlet and the plug may cause overheating of the plug. If this occurs, try inserting the plug into a different outlet. Contact a qualified electrician to inspect the original outlet for damage.
IN THE BOX |
|
|
| ||
• | MICATHERMIC HEATER | • | 4 | - RUBBER FEET | |
• | INSTRUCTION BOOKLET | • | 4 | - WHEEL SCREWS | |
• | 4 | - LEGS | • | 4 | - SMALL BLACK SPRING WASHERS |
• | 4 | - WHEELS | • | 4 | - SMALL GREY WASHERS |
4
