Soleus Air FS2-40R-32 Operating Instructions, Using Fan Controls, Using the Auto-onFeature

OPERATING INSTRUCTIONS

Using Fan Controls

1.Set the fan on a stable, level surface.

2.Turn the fan on by pressing the POWER/SPEED button on the Control Panel or Remote Control.

3.Adjust the speed setting by pressing the POWER/SPEED on the Control Panel or remote control.

4.Pressing the MODE button on either the fan or the remote will choose the desired wind mode: Standard, Sleep, & Natural. In standard mode the fan operates at a steady speed. In Sleep mode the fan decreases speed in the middle of the oscillation pattern. Natural mode simulates the wind by randomly alternating the fan speed.

5.To oscillate the fan head, press the OSCILLATION button located on the fan or the SWING button on the remote. Each press of the oscillation button will change the oscillation pattern. You can choose between side-to-side, up and down, and figure 8 oscillation patterns

6.This fan includes a 12 hour auto shut-off timer. To operate the timer, press the TIMER button (located on the fan or on the remote) until the desired time is visible on the LCD Display. Each button press will increase the time by 1 hour increments. Once the timer is set the you will see “HR” and a clock icon light up on the display. Once set, the timer will count down to zero and turn off the fan.

7.To turn the fan off, press the POWER/SPEED button on the Control Panel or remote control until the unit turns off.

Using the Auto-on Feature

1.First turn the fan on by pressing the POWER/SPEED button on the Control Panel or Remote Control. You will see the current room temperature flashing on and off on the LCD display.

2.Once the fan is on, press the AUTO button located on the remote control or the control panel.

3.“AUTO” should now be displayed on the LCD display and the current room temperature will stop flashing on the display. When the fan is in auto mode, it will vary speeds according to the room temperature. When the room temperature is below 68° the fan will be in standby mode (off). When the temperature is between 68° F and 74° F the fan will operate at low speed (1). When the temperature is between 75° F and 81° F the speed will increase to medium (2). The fan will operate at high speed (3) once the room temperature is equal to or greater than 82° F.

Adjusting Height and Fan Head Tilt

1.To adjust the height of the fan, turn the Adjustable Height Knob (L) counter-clockwise to loosen the stand. Adjust the fan to the desired height, then firmly tighten to secure into place.

2.To adjust the tilt on the Fan Head, grasp the fan head and push back or pull forward to achieve the desired tilt.

6