Soleus Air GM-PAC-12E1 manual Remote Control Operating Instructions, On/Off Button, Mode Button

REMOTE CONTROL OPERATING INSTRUCTIONS

SIGNAL TRANSMITTER

REMOTE CONTROL

ON/OFF ON/OFF BUTTON

Press the ON/OFF (POWER) button once to manually turn the unit on. Press the Power button once more to turn the unit off.

MODE MODE BUTTON

Press the MODE Button repeatedly to cycle between the different modes.

AUTO

COOL

DRY

FAN

HEAT NOTE: Heat Mode is only available on GM-PAC-12E1HP

- / + - / + BUTTONS

When the unit is in Air Conditioner or Heater (GM-PAC- 12E1HP) mode you can select your desired temperature. Press the TEMP SELECT buttons (+ or -) to select your desired temperature setting. The temperature on the LCD display on the remote control will increase or de- crease accordingly. Hold the +/- buttons for two seconds to rapidly increase or decrease the temperature. Temp. range is 61°F—86°F.

FAN FAN BUTTON

Press the Fan Speed button to change fan speeds.

Fan Speeds:

Low Speed Medium Speed

High Speed

NOTE: When the unit is in Dehumidifier (DRY) mode, the fan speed is not adjustable.

TEMP BUTTON

Press the Up and Down Swing Button to turn on and off the vertical swing mode. In vertical swing mode, the lou- vers will rotate up and down to circulate more air.

When the unit is off, press the Up and Down Swing But- ton and “+” at the same time to enable stationary swing mode. Stationary Swing mode allows for more control over the way the louvers swing up and down. The Swing icon on the Remote LCD will blink twice when this is

Blinks for 2 Seconds

In Stationary Swing mode, press the Up and Down Swing Button to change the swing pattern per below:

Disable Stationary Swing Mode by pressing the Up and Down Swing Button and “+” button at the same time. The Swing Icon on the Remote LCD will blink twice when this is disabled.

10