Soleus Air HGW-308R-W manual Operating Instructions

OPERATING INSTRUCTIONS

CONTROL PANEL & REMOTE OPERATION

1.Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet. Only operate heater in upright position with caster wheels attached.

2.Turn the heater on by pressing the On/Off button on the control panel or the supplied remote control.

3.Select a heat setting:

On the control panel, press the MODE button to toggle between the two heat settings; LOW (1000W) or HIGH (1500W) . When using the remote control press the HIGH or LOW buttons to select the preferred power setting.

4.Adjust the thermostat by pressing the TEMPERATURE SELECT buttons (▲ or ▼) on the control panel or remote control. The digital readout will display the selected temperature.

5.Once you have chosen the desired temperature, the heater will remain on until the room temperature increases to the temperature on the digital display. The heater will cycle on and off to maintain the desired room temperature.

6.This heater is equipped with a 12-hour automatic shut-off timer. To activate the timer, press the TIMER button on the control panel or remote control. Each press of the timer button will increase the heater operating time by one hour. The digital readout will display the number of hours you have selected. To turn off the timer, simply press the TIMER button until the digital readout displays your current selected temperature. Once you have selected a shut off time, the heater will operate for the selected time, then automatically shut off.

7.The indication lights on the control panel communicate how the heater is operating. The TIMER light will turn-on when the timer is selected. When HIGH, LOW modes are selected, the corresponding lights will turn on accordingly.

8.Unplug the heater when not in use.

Temperature & Timer	Receiver for Remote Control
Display
	Timer Select Button
		Temperature Select Buttons
Indication Lights
		Mode Select Button
	On/Off Button (Power)

8