ASSEMBLY
1.Remove the heater body, two wheelbases, wheels, screws, and washers from the box. Remove the pack- aging materials and keep for future storage.
2.Attach the wheels to each wheelbase with the supplied wheel screws, small black
WHEEL SCREW |
|
WHEEL | SMALL BLACK SPRING WASHER |
| |
| SMALL GREY WASHER |
WHEEL BASE 
3.Be certain the heater is unplugged and the controls are set to off. Set the heater on the floor upside down.
4.Attach a wheel base (with wheels attached) to each end of the heater body using the supplied standard screws, large black
STANDARD SCREW 
WHEEL BASE 
LARGE BLACK SPRING WASHER
LARGE GREY WASHER
MICATHERMIC HEATER
6
