Soleus Air HM1-10R-32 owner manual Operating Instructions

OPERATING INSTRUCTIONS

Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet. Only operate heater in upright position with caster wheels attached.

Temperature Display	Receiver for Remote Control
	Timer Button
Indication Lights		Temperature Buttons
		Mode Select Button
	On/Off Button

1.Turn the heater on by pressing the On/Off button on the control panel or the supplied remote control.

2.Select a heat setting.

Press the MODE button to toggle between the three heat settings; LOW (500W), HIGH (1000W) and ECO mode. When using the remote control press either MODE button to select the preferred power setting.

NOTE: ECO mode is an Economic Energy Saving Function. When ECO mode is chosen the heater will consume one-third less power once the room temperature reaches a certain point.

3.Adjust the thermostat by pressing the arrows on the control panel or remote control. The digital readout will display the selected temperature.

4.Once you have chosen the desired temperature, the heater will remain on until the room temperature increases to the temperature on the digital display. The heater will cycle on and off to maintain the desired room temperature.

5.This heater is equipped with a 12-hour automatic shut-off timer. To activate the timer, press the TIMER button on the control panel or remote control. Each press of the timer button will increase the heater operating time by one hour. The digital readout will display the number of hours you have selected. To turn off the timer, simply press the TIMER button until the digital readout displays your current selected temperature.

6