Soleus Air JC-46 owner manual Operating Procedures & Maintenance, Cleaning Your Wine Cooler

OPERATING PROCEDURES & MAINTENANCE

Cleaning Your Wine Cooler

Upon installing your wine cooler, it is recommended that it be cleaned thoroughly.

1)Turn the temperature control to “0”, unplug the unit, and remove the bottles and shelves.

2)Wash the inside with a damp warm cloth containing water and baking soda solution. The solution should be about two tablespoons of baking soda to 1 quart (32 oz) of water.

3)Wash the shelves with a mild detergent solution.

4)Make sure the door gasket (seal) is kept clean in order to keep the unit running efficiently.

5)The outside of the beverage center should be cleaned regularly with a mild detergent solution and warm water.

6)Dry the interior and exterior with a soft cloth.

Moving Your Wine Cooler

1)Remove all contents and make sure to tape down any loose items.

2)To avoid damaging the leveling screws, turn them all the way into the base.

3)Tape the door shut.

4)Make sure your unit stays in the upright position during transportation.

Defrosting Your Wine Cooler

Your wine cooler is designed with an “Auto-Cycle” defrost system. The refrigerated surfaces of the unit will defrost automatically, during the “off” cycle of the cold control. Water from the unit is disposed of automatically, by means of being channeled onto a drip tray located on the compressor. Heat transfer

7