Keep the windows and the doors closed to aid the effectiveness of the unit in removing the moisture from the room.
NOTE: The unit will not perform dehumidification when the room temperature is lower than 61 degree.
3)Fan Operation
a)Plug the Power Cord to the power outlet.
b)Turn on the unit by pressing the On/Off Button on the control panel.
c)Press the Mode Button until “ 
” appears on the VFD display.
d)Select the fan speed by pressing the Fan Button.
NOTE: When the unit is running on fan mode, the exhaust duct is inoperative and is not required.
4)Heating Operation
a)Plug the Power Cord to the power outlet.
b)Turn on the unit by pressing the On/Off Button on the control panel.
c)Press the Mode Button until “ 
“ appears on the VFD display.
d)Press the button ∧ or ∨ until the desired room temperature appears on the VFD. The temperature ranges from 61 o
e)Select the fan speed by pressing the Fan button. It is recommended to use the low fan
NOTE: When the unit is running on heating mode, the exhaust duct is inoperative and is not required.
5)Auto Operation
a)Install the exhaust ducts properly
b)Plug the Power Cord to the power outlet.
c)Turn on the unit by pressing the On/Off Button on the control panel.
d)Press the Mode Button until the “
” appears on the VFD display.
e)Select the fan speed by using FAN button.
During the AUTO model, the unit operates at heating mode when the room temperature is below 68 o F degree. It operates at dehumidifying mode when the room temperature is between 68 o F to 80 o F degree. It operates at cooling mode when the room temperature is above 80 degree. You may use the timer with the AUTO mode.
6)Sleep Mode (This Mode is available when using Remote control )
a)The air conditioner is in operation
b)Press SLEEP Button, the “
” appears on the VFD.
9
