When you use the unit as an air conditioner or a dehumidifier, the fresh outdoor air must be directed to the unit and the hot air must be exhausted out of the room to complete the air exchange. When the unit is operating on fan or heating models, no outdoor air exchange takes place. You do not need to hookup the window kits and exhaust hose when you use the unit as a fan or a heater.

a)Pull out of both ends of the exhaust ducts for approximately 6”.

b)Screw clockwise the exhaust ducts with one end to the terminal end and other end to the window kit adapter.

c)Remove exhaust outlet wall covers from the back of the unit by screwing the covers counter-clockwise before lifting them up.

d)Mount terminal ends of the exhaust hoses to the unit.

e)Open window or sliding door for approximately 5 inches (130 mm)

f)Adjust the length of the window kit to the same length of the window or the sliding door. Use all three panels if necessary. Cut the window piece as needed to fit the length of your window or sliding door. Make sure that both holes on the main piece are not covered by other pieces.

g)Place the window kit to the window or sliding door. Close the window or door as far as it goes.

h)Adjust the lengths of exhaust hose and affix the window kid adapters onto the holes on the window kit.

NOTE: When using the window kit on a window or sliding door it will cause the window or sliding door not to be properly closed and locked. Additional security measurements should be taken

Wall Mount

1)Do not use window kit adapter. Mount the one end of the exhaust ducts onto holes of 5” on the wall.

2)Using exhaust outlet wall covers to cover the holes in the wall when the unit is not in use.

NOTE: In order to increase the efficiency, the exhaust ducts should be keeping as short and straight as possible. It is not recommended to increase the manufacturer’s length of the exhaust hose. This may impede or damage the unit.

CONTROL PANEL AND LCD DISPLAY

6

Page 5 Page 7
Page 6
Image 6
Soleus Air MAC-10K, MAC-12K owner manual Control Panel and LCD Display
Page 5 Page 7

MAC-12K, MAC-10K specifications

The Soleus Air MAC-10K and MAC-12K portable air conditioners are designed to provide efficient cooling solutions for both residential and commercial spaces. Known for their performance and versatility, these units have become popular choices for individuals seeking effective climate control without the need for permanent installation.

One of the standout features of the MAC-10K and MAC-12K models is their impressive cooling capacity. The MAC-10K has a cooling power of 10,000 BTUs, making it suitable for spaces up to 350 square feet. On the other hand, the MAC-12K, with its 12,000 BTUs, is designed for slightly larger areas, efficiently cooling up to 450 square feet. This flexibility makes them ideal for a variety of settings including bedrooms, living rooms, and office spaces.

Both models are equipped with a user-friendly electronic control panel and a remote control, allowing users to adjust settings without the need to get up. The LCD display provides clear visibility of the temperature and settings, enhancing the overall user experience.

Energy efficiency is another key characteristic of the Soleus Air MAC series. With an Energy Efficiency Ratio (EER) rating that meets stringent Energy Star requirements, these portable air conditioners not only cool effectively but also help in reducing electricity bills. This is a significant advantage for environmentally conscious users who seek to minimize their carbon footprint.

The MAC-10K and MAC-12K units also utilize advanced cooling technologies, including a powerful compressor and a multi-speed fan. This combination ensures quick cooling while maintaining low noise levels, so users can enjoy a comfortable environment without disruptive sounds. Additionally, both models feature an automatic reset function and a built-in dehumidifier, which can remove excess moisture from the air, enhancing comfort during humid days.

Mobility is another important aspect of these models. The integrated caster wheels allow for easy movement from room to room, providing users with the flexibility to cool different areas as needed. The units come with a window installation kit, enabling quick setup and installation without the need for professional assistance.

In conclusion, the Soleus Air MAC-10K and MAC-12K portable air conditioners combine powerful cooling capabilities with user-friendly features and energy efficiency, making them ideal choices for anyone looking to enhance their indoor climate control. Whether it’s for personal use or in a workplace setting, these models provide a reliable solution for effective cooling.
Top Page Image Contents