Soleus Air MS-10R operating instructions Remote Control, Operating Instructions

OPERATING INSTRUCTIONS

REMOTE CONTROL OPERATION

The remote control can be used to perform all the operations that can be performed from the control panel.

REMOTE CONTROL

HEIGHT ADJUSTMENT: Press in the height adjustment button and simultaneously pull the sliding column up to the desired height. Release the height adjustment button to set. To reduce the height, press in the height adjustment button and simultaneously push the sliding column down. Release the button to set.

HEATER HEAD ADJUSTMENT: Grasp the reflection hood and gently tilt forward or backwards. The

unit will click into the different positions. (Notice: When adjusting the heater head, the heater must be turned off to ensure safety.)

NOTE: A tip-over safety protection switch is installed at the bottom of the heater. When the heater is placed horizontally, laid down or lifted up, it stops operating to ensure safety. After placing the heater upright it will resume operation.

NOTE: For safety, if the heater’s internal temperature rises above a certain point, the heater is designed to automatically shut off. To restart the heater in this situation:

1.Push the power button to OFF.

2.Unplug the power cord from the outlet and allow the heater to cool for at least 10 minutes.

3.Plug the power cord back into the outlet. Use the control panel to select the desired settings.

WARNING: It is normal for the power cord to feel warm to the touch; however, a loose fit between the outlet and the plug may cause overheating of the plug. If this occurs, try inserting the plug into a different outlet. Con- tact a qualified electrician to inspect the original outlet for damage.

7