OPERATING INSTRUCTIONS
1)FILL THE WATER RESERVOIR - Pull the water reservoir drawer out from the back of the unit and fill the water reservoir by pouring water into the drawer. Once you are finished filling the reservoir, close the drawer in the back of the unit. SEE FIGURE A BELOW.
2)POWER ON THE HumidiBreeze - Plug the power cord into a three pronged grounded electrical outlet. Once the unit is plugged in, press the power button to turn on the HumidiBreeze. When power is “ON” the power button will light up blue in color. To turn off the HumidiBreeze, press the power button again.
When the HumidiBreeze is “OFF” the blue light on the button will shut off.
3)ADJUST THE HumidiBreeze POWER - Turn the control dial
SEE FIGURE B BELOW.
4)When the water bucket is empty, turn the unit off and refill the water bucket. DO NOT fill the water bucket while the unit is on.
FIGURE A
FIGURE B |
|
INCREASE HumidiBreeze POWER | DECREASE HumidiBreeze POWER |
| 5 |