MAINTENANCE
1.Unplug the unit and let it cool completely.
2.To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. CAUTION: DO NOT let liquid enter the heater.
3.DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may cause damage or deterioration to the surface of the heater.
4.DO NOT immerse the heater in water.
5.Wait until the unit is completely dry before use.
STORAGE
Store the heater in a cool, dry location when not in use. To prevent dust and dirt
TROUBLESHOOTING
If the heater will not operate, please check the following before seeking repair of service:
1.Check if the power cord is plugged into an electrical outlet, if not, plug in.
2.Check if electricity to the main fuse is working.
3.Make certain the power switches are turned on. If not, choose a setting. Make certain the thermostat control is turned on.
NOTE: The heater may not be operating if the thermostat control is set lower than the room temperature. To begin operation, turn thermostat control to the right for a higher heat setting.
SII0805
