Soleus Air SG-PAC-10E2 (KY-101) Control Panel & Display, Operating Instructions, l.ON/OFF Button

CONTROL PANEL DISPLAY & OPERATING INSTRUCTIONS

CONTROL PANEL & DISPLAY

Temperature selection button	LED	window	COOL mode light Receiver window
				DRY mode light

FAN Speed light	ON/OFF button FAN mode light MODE button
	Fan speed button

OPERATING INSTRUCTIONS

When pressing key is valid, buzzer makes a sound, indicated light indicates relevant state, system will last for

2seconds.

l.ON/OFF Button

Press the button once to manually turn the unit on. Press once more to turn the unit off.

2. "+","-" Button

In COOL mode, press "-" once, the set temperature will decrease 1 C( F ) , press "+" once, the set temperature will increase 1C ( F). The set temperature range from 16 C to 30 C(61 F to 86 F).

3.MODE Button

Press MODE Button repeatedly to cycle between the modes:Cooling,Dry,and Fan only mode. Each press of the MODE button will light up a different lights on the control panel. The exhause hose and window kit must be installed when the unit is in Cool or Dry mode. When using the unit as a fan,it is unnecessary to keep the exhaust hose and window kit connected to the unit.

4. Fan 6peedButton

When the unit is running in Cool or Fan mode, press the Fan speed Button to select the fan speed in High,

Middle, Low , Auto. In cool mode, it can decrease the temperature of the room, and make people very comfortable.

5.Water Full

When COOL or DRY is running, condensate will drain to water tank. When water tank is filled, buzzer will sound 8 times, LED screen show error code ‘H8’.

In this case, reference page 8 to drain out water intank.

6. Louver Direction

This unit has 4-Way directional louvers. Use the louver guides to direct air where cooling or fanning is needed most.Hold the louver and adjust the air flow direction, as shown in the right diagram.

Hold this hand grip to adjust the direction of Horizontal Louvers

Hold this hand grip to adjust the direction of Vertical Louvers

1