Soleus Air SG-PAC-10E5 Remote Control Operating Instructions, Temp Select Buttons Swing Button

REMOTE CONTROL OPERATING INSTRUCTIONS

NOTE: Heat mode is not available on the SG-PAC-10E5

and KY-100E5

POWER BUTTON

FAN BUTTON

SLEEP BUTTON

LCD DISPLAY and

MODE LABELS

MODE BUTTON

TEMP SELECT BUTTONS

SWING BUTTON

(Not Available on SG-PAC-10E5&KY-100E5)

TIMER BUTTON

1)Power On and Off - Press the ON/OFF (POWER) button once to manually turn the unit on. Press the Power button once more to turn the unit off. When you manually power the unit on and off by pressing the ON/OFF button, the preset timer will be cancelled.

2)Mode Selection - Press the MODE Button repeatedly to cycle between the different modes: Auto, Air Conditioner, Dehu- midifier, and Fan only mode. Once a mode is selected, an arrow will light up on the LCD display next to the selected MODE label on the remote. Auto mode automatically chooses the air conditioner, dehumidifier, or fan mode based on the current room temperature.

NOTE: HEAT MODE IS

NOT AVAILABLE

3)Fan Speed - Press the FAN speed button to cycle through low, medium, and high fan speeds. The small fan icons will light up depending on which speed is selected. The more fan icons light up, the higher the speed. The fan icons are located on the LCD display next to the SPEED label.

4)Temperature Setting - When the unit is in Air Conditioner mode you can select your desired temperature. Press the TEMP SELECT buttons (+ or -) to select your desired temperature setting. The temperature on the LCD display on the remote control will increase or decrease accordingly. Hold the +/- buttons for two seconds to rapidly increase or decrease the temperature.

9