Intuitive Touchscreen Control
Comprehensive Channel Display
The Channel Information screen provides a wealth of feedback about the signal, routing and processing, laid out in a clear and logical fashion. Each screen displays 8 channels simultaneously, with a more detailed view of the processing across the lower part of the screen, automatically following the channel which has its attention (ATT) button pressed.
The meter may be sourced from one of 6 points in the channel, indicated here above the Dynamics Gain reduction meter
5.1, stereo and mono channels may be arranged in any order, and clearly identified
Indicators for the 24 Utility busses are shown, with the 8 ASG and the 2 PGM busses
Lower section shows details of channel selected, including sources for sidechain, insert etc.
Switchable between single channel and alternate multichannel view
Each channel shows the fader number, source | Indicators for the 24 Utility |
name and DSP channel in use, dynamically | busses are shown, with the 8 |
updated when a change is made | ASG, the 2 PGM, and the |
Typical Channel Information Display
NHK Sapporo
“It is very flexible and easy to operate and, because it has a flexible signal router, our engineers don’t need to patch regular programs, thus saving an enormous amount of time.”
Tetsuo Ueno, Chief Engineer, NHK Sapporo, Japan
NESN Truck
Aux Send gain indicators, showing mono aux | Enlarged process order icons, showing Insert | ||
echoes the last parameter altered | level and stereo aux level/pan position, and | point, EQ and Filters, Fader, Dynamics and | |
Gate/Expander) transfer response graph | on the selected channel | colour coded pre/post and on/off status | Delay sections respectively |
C100 HD Range. This is SSL.
“The C100 certainly is a great board for us, because of its 5.1 capability, its flexibility, and most important, the sound quality. It’s been a major benefit.”
