Information
Before You Start
STOP
0
001BA140 KN
The four positions of the
Master Control lever
$= Engine off – ignition is switched off.
#= Normal run position – engine runs or can fire.
To move the Master Control lever from # to nor l, press down the throttle trigger interlock and squeeze throttle trigger at the same time.
n=Warm start – this position is used to start a warm engine. The Master Control lever moves to the normal run position as soon as the throttle trigger is squeezed.
l=Cold start – this position is used to start a cold engine.
Starting / Stopping the Engine
Starting the Engine
146BA001 KN
Only Models with Decompression Valve
:Press in the button (arrow) to open the decompression valve.
The valve closes automatically as soon as the engine begins to fire.
:For this reason the decompression valve should be pressed in before each starting attempt.
English / USA
STOP
0
1
2
3 | KN | |
146BA002 | ||
|
All Models
:Observe safety precautions.
:Push hand guard (1) forward: The chain is now locked.
:Press down trigger interlock (2) and squeeze throttle trigger (3) at the same time.
Set Master Control lever to: for cold start l
for warm start n
(even if engine has been running but is still cold)
MS 270, MS 270 C, MS 280, MS 280 C | 39 |