
Replacing Starter Rope and Rewind Spring
1
1 1
|
| KN |
1 | 1 | 146BA017 |
|
:Remove the screws (1).
:Push the hand guard upward.
:Pull the underside of the fan cover away from the fan housing and remove it downward.
2
3
4 | 4 | |
001BA096 KN | ||
|
Starter Grip without ElastoStart
:Use a screwdriver to pry the rope out of the starter grip.
:Remove the remaining rope from the rotor and grip.
146BA020 KN
:Thread the new rope through the starter grip and tie a simple overhand knot.
:Pull the knot back into the grip.
English / USA
Starter Grip with ElastoStart*
5 | KN | |
135BA000 | ||
|
:Ease the cap (5) out of the starter grip.
:Remove the remaining rope from the rotor and grip.
146BA018 KN
:Use a screwdriver or suitable pliers to remove the spring clip (2) from the starter post.
:Carefully remove the rope rotor with washer (3) and pawls (4) – do not pull the rewind spring out of the housing – take care to avoid injury.
MS 270, MS 270 C, MS 280, MS 280 C
:Thread the new rope through the starter grip and tie a simple overhand knot.
:Pull the knot back into the grip.
:Refit the cap in the grip.
*see “Guide to Using this Manual”
49