WIRELESS DOORBELL & TELEPHONE

SIGNALER

MODEL DB200

SONIC ALERT’S 5 YEAR LIMITED WARRANTY

The Wireless Doorbell Signaler Model DB200 is

warranted against manufacturing defects in materials and workmanship for two (5) years from the date of purchase. Within this period Sonic Alert will repair or replace at our option the DB200 without charge for parts and labor. Simply send the DB200 (postpaid) and a copy of your sales slip as proof of purchase to:

Sonic Alert Inc., 1050 E. Maple Road, Troy MI 48083

OPERATION

The state-of-the-art, Doorbell Signaler will alert you when someone comes to visit. The Doorbell Signaler, Model DB200 is the only doorbell and intercom signaler that requires no wires and can be installed in seconds. DB200 will alert you that someone is at your door by flashing a light plugged into the base unit or any Sonic Alert receiver anywhere in your home.

The DB200 is designed to work with homes with or without an existing doorbell or chime and all existing buzzer and intercom systems.

Other features include selectable number of flashes (5 or 10), different flash code for front door, rear door, or intercom. Additional sensors sold separately for 2nd door or source. There is also a built-in chime for hearing members of the family (can be turned off by using the switch on the right side of the DB200). The DB200 receives an RF radio signal from the DB200 sensor, and flashes the light plugged into the built-in outlet of the DB200. Use a 300 watt or less incandescent lamp only. The DB200 can send a signal to all Sonic Alert remote receivers. Note: Must be used only with Sonic Alert receivers for proper operation, other manufacturers products are not reliable with our products.

This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void user’s authority to operate the equipment.

SIGNALER

DB SENSOR

INSTALLATION

To install the DB200, follow the diagrams and instructions on the following page that match the type of installation you need for your home. If the installation follows diagrams 1-4, a 9 volt alkaline battery is required in the DB sensor.

Please check the switches on your DB200 Sensor before installing. Do not change switches 1-6 these are pre set. It’s very important that the switch settings on both units match . See figure 1.1 on back side for settings.

DB Sensor settings, smaller unit: 1 thru 6 dip switches are set at the factory and only need to be changed if your neighbor has a DB200 or DB100. The 8 dip switches should be set as follows:

a)1 thru 3 dip switches are set in the ON position and 4 thru 6 are set in the OFF position. If you need to change the dip switch settings to avoid interference with your neighbors make sure you change both the DB200 Signaler to match the DB Sensor.

b)The 8th switch determines the number of flashes when someone is at your door. In the ON position your until will flash 5 times and in the OFF position your unit will flash 10 times. This feature is wonderful when you have an extra sensor for the back door. One sensor would be set in the ON position and the other would be set in the OFF position.

c)The 7th switch is for use when using 2 sensors, this switch determines the settings for front or back door. If using for one door only set this switch in the ON position. At this setting your unit will flash at a fast rate and will make a ding/dong sound. If using 2

sensors one for the front door and one for the back door the setting for the 2nd sensor would be in the OFF position. In this position the front door will flash at a different flash rate than the back door. In the OFF position your back door sensor will flash at a slow rate with a dong/dong sound.

Function settings:

The function switch on the back of DB sensor (smaller unit) should be set depending on which installation application you need. See diagram on back.

Switch position:

Top - Intercom/ Buzzer System/ Wireless Chime Box Installation see (3 &4).

Center - Outside Doorbell Button Only see (1 & 2)

Bottom - Hard Wired to Existing Doorbell chime Box Installation see (5).

Page 2
Page 1
Image 1
Sonic Alert warranty Wireless Doorbell & Telephone Signaler Model DB200, Sonic ALERT’S 5 Year Limited Warranty
Page 2

DB200 specifications

Sonic Alert DB200 is a state-of-the-art alarm clock specifically designed for individuals with hearing impairments. This innovative device ensures that users do not miss important wake-up calls, making it a valuable addition to any bedroom. Its sleek design and robust features cater to a wide range of needs, significantly enhancing the waking experience.

One of the standout features of the Sonic Alert DB200 is its super loud alarm. Producing a volume of up to 113 decibels, this alarm clock is louder than most conventional alarms, ensuring that even users with significant hearing loss can wake up on time. The alarm tone can be adjusted, allowing users to find a sound that best suits their preferences.

In addition to its robust audio alarm, the DB200 is equipped with a powerful bed shaker. This unique technology uses strong vibrations to alert individuals who may not hear the alarm. The bed shaker can be placed under a pillow or mattress, sending powerful tremors to rouse the user gently but effectively. This dual alarm system is ideal for users who rely on multiple senses to wake up.

The Sonic Alert DB200 also features an easy-to-read, large display with a bright, backlit screen. This makes it convenient for users to check the time, even in low-light conditions. The display shows the time in large digits, ensuring visibility from a distance. Additionally, the clock includes a snooze feature, allowing users to catch a few extra minutes of sleep.

Another key characteristic of the DB200 is its adjustable alarm settings. Users can select different alarm times for different days of the week, catering to varied schedules for workdays and weekends. This customization ensures that users can tailor their waking experience to their routines effectively.

The Sonic Alert DB200 is powered by both AC and battery backup, ensuring that the alarm clock continues to function even during power outages. This reliability provides peace of mind, as users can trust that they will wake up on time, irrespective of external circumstances.

In summary, the Sonic Alert DB200 combines loud alarms with effective vibration technology, an easy-to-read display, and customizable settings to create an exceptional waking experience tailored for those with hearing challenges. Its thoughtful design and robust character make it a must-have for anyone needing reliable wake-up assistance.
Top Page Image Contents