DELUXE REMOTE RECEIVER
MODEL SA201
OPERATION
The Deluxe Remote Receiver SA201, will alert you by flashing a light when a signal is transmitted from a Sonic Alert Transmitter (Telephone Ring Signalers, Baby Cry Signaler or Doorbell Signaler). A signal from one or all of the transmitters will be received by the SA201 and in turn will flash a light which is plugged into the SA201 cord. The SA201 will have a different sequence of flashing depending of which transmitter is being activated. The SA201 can also be used for room lighting by pushing the button on the SA201. The green light will indicate if the lamp is in the “on” or “off” position.
INSTALLATION
1.Plug a lamp into the outlet on the cord of the SA201 as shown in the diagram on the reverse side. Make sure the switch on the lamp is in the "ON" position or the lamp will not flash when the telephone rings.
2.Plug the SA201 Remote Receiver into any standard electrical outlet.
3.From this point on, only use the button on the SA201 to turn the lamp on and off. Pressing the button once will turn the lamp ON. Pressing the button again will turn the lamp OFF. A green light under the button will come on whenever the lamp should be on. If the green light is on and the lamp is not on, the lamp is either turned off or the light bulb is burned out. If you turn the switch on the lamp to the “OFF” position, the lamp will not flash when the SA201 is activated.
4.If the lamp plugged into the SA201 is “on,” it will flash “off” when the telephone rings. If the lamp is in the “off” position, it will flash "on" when activated.
DELUXE REMOTE RECEIVER
MODEL SA201
OPERATION
The Deluxe Remote Receiver SA201, will alert you by flashing a light when a signal is transmitted from a Sonic Alert Transmitter (Telephone Ring Signalers, Baby Cry Signaler or Doorbell Signaler). A signal from one or all of the transmitters will be received by the SA201 and in turn will flash a light which is plugged into the SA201 cord. The SA201 will have a different sequence of flashing depending of which transmitter is being activated. The SA201 can also be used for room lighting by pushing the button on the SA201. The green light will indicate if the lamp is in the on or off position.
INSTALLATION
1.Plug a lamp into the outlet on the cord of the SA201 as shown in the diagram on the reverse side. Make sure the switch on the lamp is in the "ON" position or the lamp will not flash when the telephone rings.
2.Plug the SA201 Remote Receiver into any standard electrical outlet.
3.From this point on, only use the button on the SA201 to turn the lamp on and off. Pressing the button once will turn the lamp ON. Pressing the button again will turn the lamp OFF. A green light under the button will come on whenever the lamp should be on. If the green light is on and the lamp is not on, the lamp is either turned off or the light bulb is burned out. If you turn the switch on the lamp to the “OFF” position, the lamp will not flash when the SA201 is activated.
4.If the lamp plugged into the SA201 is “on,” it will flash “off” when the telephone rings. If the lamp is in the “off” position, it will flash "on" when activated.
