The model TR75 telephone signaler alerts you that your
telephone is ringing by flashing a lamp on and off
automatically. The TR75 can flash lights in other rooms by use
of remote receivers, (Models SA101, SA201, RH100, Sonic
Boom Alarm Clock)
INSTALLATION 1. Plug the modular phone plug at the end of the TR75 cord
into a standard modular phone jack. (Use Jack type USOC
RJIIC) The seven-foot cord is long enough to
accommodate a variety of phone locations.
2. Plug a lamp into the pluglet on the TR75. Make sure the
switch on the lamp is in the “ON” position or the lamp
will not flash when the telephone rings. The switch light
will go on each time the lamp flashes. If the switch light
comes on and the lamp is not flashing, make sure the lamp
is in the on position and the bulb is not burned out.
3. Plug the TR75 into any standard electrical outlet.
4. To use Remote Receivers (Model SA101, SA201, RH100.
BL300 or SB1000) simply plug receiver into a electrical
outlet and plug a lamp into the outlet located on the
receiver, model SA102, SA201and clock.
The TR75 and Remote Receivers are designed for incandescent
light bulbs up to 300 watt. Never use the TR75 with a
fluorescent light or any type of appliance.
MADE IN U.S.A.
1050 East Maple Rd, Troy MI 48083
(248)577-5400 www.SonicAlert.com
OPERATION
The model TR75 telephone signaler alerts you that your
telephone is ringing by flashing a lamp on and off
automatically. The TR75 can flash lights in other rooms by use
of remote receivers, (Models SA101, SA201, RH100, Sonic
Boom Alarm Clock)
INSTALLATION 1. Plug the modular phone plug at the end of the TR75 cord
into a standard modular phone jack. (Use Jack type USOC
RJIIC) The seven-foot cord is long enough to
accommodate a variety of phone locations.
2. Plug a lamp into the pluglet on the TR75. Make sure the
switch on the lamp is in the “ON” position or the lamp
will not flash when the telephone rings. The switch light
will go on each time the lamp flashes. If the switch light
comes on and the lamp is not flashing, make sure the lamp
is in the on position and the bulb is not burned out.
3. Plug the TR75 into any standard electrical outlet.
4. To use Remote Receivers (Model SA101, SA201, RH100.
BL300 or SB1000) simply plug receiver into a electrical
outlet and plug a lamp into the outlet located on the
receiver, model SA102, SA201and clock.
The TR75 and Remote Receivers are designed for incandescent
light bulbs up to 300 watt. Never use the TR75 with a
fluorescent light or any type of appliance.
MADE IN U.S.A.