Additional Information

Specifications

Display Unit

Power Requirements: 220–240 V AC, 50 Hz

Screen Size:

KDL-40xxxxx: 40 inches

KDL-37xxxxx: 37 inches

KDL-32xxxxx: 32 inches

KDL-26xxxxx: 26 inches Display Resolution:

1,366 dots (horizontal) × 768 lines (vertical) Power Consumption:

KDL-40xxxxx: 165 W or less

KDL-37xxxxx: 150 W or less

KDL-32xxxxx: 130 W or less

KDL-26xxxxx: 90 W or less Standby Power Consumption*:

KDL-40xxxxx: 0,6 W or less

KDL-37xxxxx: 0,6 W or less

KDL-32xxxxx: 0,7 W or less

KDL-26xxxxx: 0,7 W or less

*Specified standby power is reached after the TV finishes necessary internal processes.

Dimensions (w × h × d): KDL-40xxxxx:

Approx: 982 x 690 x 265 mm (with stand)

Approx: 982 x 643 x 124 mm (without stand) KDL-37xxxxx:

Approx: 906 x 658 x 265 mm (with stand)

Approx: 906 x 611 x 126 mm (without stand) KDL-32xxxxx:

Approx: 790 x 577 x 214 mm (with stand)

Approx: 790 x 530 x 119 mm (without stand) KDL-26xxxxx:

Approx: 657 x 500 x 214 mm (with stand)

Approx: 657 x 453 x 121 mm (without stand)

Mass:

KDL-40P30xx/ KDL-40U30xx: Approx: 23,5 kg (with stand) Approx: 20,0 kg (without stand)

KDL-37P30xx/ KDL-37U30xx: Approx: 21,0 kg (with stand) Approx: 18,0 kg (without stand)

KDL-32P30xx/ KDL-32U30xx: Approx: 15,0 kg (with stand) Approx: 13,0 kg (without stand)

KDL-26P30xx/ KDL-26U30xx: Approx: 12,0 kg (with stand) Approx: 10,0 kg (without stand)

KDL-26Sxxxx/KDL-26Txxxx: Approx: 12,5 kg (with stand) Approx: 10,5 kg (without stand)

Panel System

LCD (Liquid Crystal Display) Panel

TV System

Depending on your country/region selection

Analogue: B/G/H, D/K, L, I

Digital: DVB-T

Colour/Video System

Analogue: PAL, SECAM

NTSC 3.58, 4.43 (only Video In)

Digital: MPEG-2 MP@ML

Aerial

75 ohm external terminal for VHF/UHF

Channel Coverage

Analogue:

48.25 - 855.25 MHz

Digital:

VHF Band III (177.5 - 226.5 MHz)

 

UHF E21 - E69 (474 - 858 MHz)

Terminals

/ 1

21-pin Scart connector (CENELEC standard) including audio/video input, RGB input, and TV audio/video output.

/ 2 (SMARTLINK)

21-pin Scart connector (CENELEC standard) including audio/video input, RGB input, selectable audio/video output, and SMARTLINK interface.

3

Supported formats: 1080i, 720p, 576p, 576i, 480p, 480i

Y:1 Vp-p, 75 ohms, 0.3V negative sync PB/CB: 0.7 Vp-p, 75 ohms

PR/CR: 0.7 Vp-p, 75 ohms

3

Audio input (phono jacks)

500 mVrms

Impedance: 47 kilo ohms HDMI IN 4, 5

Video: 1080i, 720p, 576p, 576i, 480p, 480i

Audio: Two channel linear PCM

32, 44.1 and 48 kHz, 16, 20 and 24 bits PC (see table)

Analogue audio (phono jacks):

500 mVrms, Impedance 47 kilohms (HDMI IN 4 only)

6 S video input (4-pin mini DIN)

6 Video input (phono jack)

6 Audio input (phono jacks)

Audio output (Left/Right) (phono jacks)

PC PC Input (15 Dsub) (see page 17)

G:0.7 Vp-p, 75 ohms, non Sync on Green

B:0.7 Vp-p, 75 ohms, non Sync on Green

R:0.7 Vp-p, 75 ohms, non Sync on Green HD: 1-5 Vp-p

VD: 1-5 Vp-p

PC audio input (minijack)

iHeadphones jack

CAM (Conditional Access Module) slot

32 GB