Set-up menu

Set-up

 

Auto Start Up

 

Language

English

Auto Tuning

Programme Sorting

AV Preset

HDMI Set-up

Sound Offset

Manual Programme Preset

Digital Set-up

 

 

 

 

 

 

 

 

 

 

 

Back:

Select:

Enter:

Exit: MENU

 

 

 

 

 

You can select the options listed below on the Set-up menu. To select options in “Settings”, see “Navigating through menus” (page 20).

Auto Start Up

Starts the “first time operation menu” to select the language, country/region and

 

location, and tune in all available digital and analogue channels. Usually, you do not

 

need to do this operation because the language and country/region will have been

 

selected and channels already tuned when the TV was first installed (page 7).

 

However, this option allows you to repeat the process (e.g., to retune the TV after

 

moving house, or to search for new channels that have been launched by

 

broadcasters).

 

 

Language

Selects the language in which the menus are displayed.

 

 

Auto Tuning

Tunes in all the available analogue channels.

 

Usually you do not need to do this operation because the channels are already tuned

 

when the TV was first installed (page 7). However, this option allows you to repeat

 

the process (e.g., to retune the TV after moving house, or to search for new channels

 

that have been launched by broadcasters).

 

 

Programme Sorting

Changes the order in which the analogue channels are stored on the TV.

 

1 Press F/f to select the channel you want to move to a new position,

 

 

then press g.

 

2

Press F/f to select the new position for your channel, then press .

 

 

AV Preset

Assigns a name to any equipment connected to the side and rear sockets. The name

 

will be displayed briefly on the screen when the equipment is selected. You can skip

 

an input source that is not connected to any equipment.

 

1

Press F/f to select the desired input source, then press .

 

2

Press F/f to select the desired option below, then press .

• AV1 (or AV2/ AV3/ AV4/AV5/AV6/ PC), VIDEO, DVD, CABLE, GAME, CAM, SAT: Uses one of the preset labels to assign a name to connected equipment.

• “Edit”: Creates your own label.

1

Press F/f to select the desired letter or number (“_” for a blank

 

space), then press g.

 

If you input a wrong character

 

Press G/g to select the wrong character. Then, press F/f to select the correct

 

character.

2

Repeat the procedure in step 1 until the name is completed.

3

Select “OK”, then press .

• “Skip”: Skips an input source that is not connected to any equipment when you press F/f to select the input source.

Continued

Functions MENU Using

27 GB