HDMI Set-up
This is used to set the “Control for HDMI” compatible equipment connected to the HDMI sockets. Note that the interlock setting must also be made on the connected “Control for HDMI” compatible equipment side.
“Control for HDMI”: This sets whether to interlock the “Control for HDMI” compatible equipment and the TV. When set to “On”, the following menu items can be performed. However, power consumption in standby mode is higher than usual.
“Auto Devices Off”: When this is set to “On”, the “Control for HDMI” compatible equipment turn on and off interlocked with the TV.
“Auto TV On”: When this is set to “On” and if the connected HDMI, control compatible equipment is turned on, the TV automatically turns on, and the displays the HDMI input from the connected equipment.
“Device List Update”: Creates or updates the “HDMI Device List”. Up to 14 “Control for HDMI” compatible equipment can be connected, and up to 4 equipment can be connected to a single socket. Be sure to update the “HDMI Device List” when you change the “Control for HDMI” compatible equipment connections or settings. Select them manually one by one until getting a correct picture for several seconds.
“HDMI Device List”: Displays the connected “Control for HDMI” compatible equipments.
Product Information
Displays your TV’s product information.
All Reset | Resets all settings to the factory settings and then displays the “Auto |
| screen. |
z
•Be sure not to turn the TV off during this period (it takes about 30 seconds) or press any buttons.
•All settings, including Digital Favourite list, country/region, language, auto tuned channels, etc. will be reset.
Analogue Set-up
Programme List | Select “Off” to hide the list of analogue channels from the XMB™ (Xross |
Display | Media Bar). |
| |
|
|
Auto Tuning | Tunes in all the available analogue channels. |
| This option allows you to retune the TV after moving house, or to search for new |
| channels that have been launched by broadcasters. |
|
|
Programme Sorting | Changes the order in which the analogue channels are stored on the TV. |
| 1 Press F/f to select the channel you want to move to a new position, then |
| press . |
| 2 Press F/f to select the new position for your channel, then press . |
Manual Programme Preset
Before selecting “Label/AFT/Audio Filter/LNA/Skip/Decoder”, press PROG +/– to select the programme number with the channel. You cannot select a programme number that is set to “Skip” (page 27).
Programme/System/Channel
Presets programme channels manually.
1Press F/f to select “Programme”, then press 
.
2Press F/f to select the programme number you want to manually tune (if tuning a VCR/ DVD recorder, select channel 00), then press 
RETURN.
3Press F/f to select “System”, then press 
.