Sony 3-298-243-13(1) 30 GB, Digital Set-up, Audio Set-up, Digital Tuning, Subtitle Set-up, RETURN, “Audio Type”:, “Mixing Level”, “Optical Out”:, “Dynamic Range”:

Digital Set-up

Digital Tuning	Digital Auto Tuning
	Tunes in the available digital channels.
	This option allows you to retune the TV after moving house, or to search for new
	channels that have been launched by broadcasters. For details, see “Auto-tunning
	the TV” (page 7).

Programme Sorting

Removes any unwanted digital channels stored on the TV, and changes the order of the digital channels stored on the TV.

1	Press F/f to select the channel you want to remove or move to a new
	position.
	Press the number buttons to enter the known three-digit programme number of the
	broadcast you want.
2	Remove or change the order of the digital channels as follows:
	To remove the digital channel
	Press	. After a confirmation message appears, press G to select “Yes”, then press
	.
	To change the order of the digital channels
	Press g, then press F/f to select the new position for the channel and press G.
3	Press	RETURN.

Digital Manual Tuning

Tunes the digital channels manually. This feature is available when “Digital Auto

Tuning” is set to “Antenna”.

1Press the number button to select the channel number you want to manually tune, then press F/f to tune the channel.

2When the available channels are found, press F/f to select the channel you want to store, then press .

3Press F/f to select the programme number where you want to store the new channel, then press .

Repeat the above procedure to manually tune other channels.

Subtitle Set-up

“Subtitle Setting”: When “For Hard Of Hearing” is selected, some visual aids may also be displayed with the subtitles (if TV channels broadcast such information).

“Subtitle Language”: Selects which language subtitles are displayed in.

Audio Set-up	“Audio Type”: Switches to broadcast for the hearing impaired when “For Hard
	Of Hearing” is selected.
	“Audio Language”: Selects the language used for a programme. Some digital
	channels may broadcast several audio languages for a programme.
	“Audio Description”: Provides audio description (narration) of visual
	information if TV channels broadcast such information.
	“Mixing Level”*: Adjusts the TV main audio and Audio Description output
	levels.
	“Dynamic Range”: Compensates for differences in the audio level between
	different channels. Note that this function may have no effect for some channels.
	“Optical Out”: Selects the audio signal that is output from the DIGITAL AUDIO
	OUT (OPTICAL) terminal on the rear of the TV. Set to “Auto” when equipment
	compatible with Dolby Digital is connected, and set to “PCM” when non-
	compatible equipment is connected.
	z
	*This option is only available when “Audio Description” is set to “On”.