b
If the picture is distorted or no picture appears, wait for about 30 seconds without pressing any buttons. The display returns to the resolution setting screen.
If the selected video output resolution is incorrect, no picture will appear on the screen when you press any button within that
30 seconds. In this case, press x on the player for more than 10 seconds to reset the video output resolution to the lowest resolution. To change the video output resolution, set “Output Video Format” in the “Video Settings” setup (page 43).
8 Select an aspect ratio that matches your TV, and press ENTER.
Select “16:9” when connecting to a wide- screen TV or a TV with a wide mode function.
Select “4:3” when connecting to a 4:3 screen TV without a wide mode function.
9 (Only when connecting your TV using the HDMI cable)
Set the “Control for HDMI” function to “On” or “Off,” and press ENTER.
Select “On” to use the “Control for HDMI” function when connecting Sony components that are compatible with the “Control for HDMI” function (page 16). If you do not use the “Control for HDMI” function, select “Off.”
10 Select “Allow” to allow Internet connections from BD contents, and press ENTER.
Select “Do not allow” to not allow Internet connections from BD contents.
11 Select “Quick Start” to shorten the startup time from standby mode, and press ENTER.
For details about “Standby Mode,” see page 52.
12 Select “Finish,” and press ENTER.
z
•You can reset settings to their factory settings (page 55).
•You can run “Easy Setup” again from “Easy Setup” in “Setup” (page 55).
30