Test Tone
On | The player emits a test tone |
| in sequence from the |
| MULTI CHANNEL |
| OUTPUT jacks to adjust the |
| sound level from each |
| speaker. When you select |
| one of the “Speaker |
| Settings” items, the test tone |
| is emitted from the selected |
| speaker. |
|
|
Off | The test tone is not emitted |
| from the speakers. |
|
|
Audio ATT
Lowers the audio output level to prevent sound distortion.
On | Enables Audio Attenuation. |
|
|
Off | Disables Audio Attenuation. |
|
|
b
“Audio ATT” does not affect the output from the HDMI OUT jack and the DIGITAL OUT (OPTICAL/COAXIAL) jack.
Audio (HDMI)
Selects the signal type for the HDMI OUT jack.
Auto | Normally select this. |
| Outputs audio signals |
| according to the status of the |
| connected HDMI device. |
|
|
2ch PCM | Downmixes to |
| Linear PCM signals before |
| outputting from the HDMI |
| OUT jack. |
|
|
b
Select “2ch PCM” when connecting a TV or an AV amplifier (receiver) that does not support Dolby Digital or DTS, otherwise noise or no sound may result.
BD Audio Setting
Selects whether to mix or not mix interactive audio and secondary audio (commentary) when playing a BD that contains such audio.
Mix | Outputs the audio obtained |
| by mixing the interactive |
| audio and secondary audio |
| to the primary audio. |
|
|
Direct | Outputs the primary audio |
| only. |
|
|
b
PCM 96 kHz and PCM 192 kHz audio signals are output as PCM 48 kHz audio signals when “BD Audio Setting” is set to “Mix.”
Dolby Digital
Selects the audio signals output when playing Dolby Digital discs.
This setting affects the output from the
DIGITAL OUT (COAXIAL/OPTICAL) jack.
Downmix Converts to output Linear
PCM PCM signals. Select this when connecting an audio device without a
Dolby Digital Select this when connecting an audio device with a builtin Dolby Digital decoder.
DTS
Selects the audio signals output when playing DTS discs. This setting affects the output from the DIGITAL OUT (COAXIAL/ OPTICAL) jack.
Downmix | Converts to output Linear |
PCM | PCM signals. Select this |
| when connecting to an audio |
| device without a |
| DTS decoder. |
|
|
DTS | Select this when connecting |
| to an audio device with a |
| |
|
|
48