KD-32NX200U

1

Checking the supplied

KD-36NX200U

accessories

3

Connecting the TV

Thank you for choosing this Sony Trinitron Television.
This step by step guide will help you to:
Insert batteries into the remote control.
Connect the aerial to your TV.
Connect a video cassette recorder (VCR) to your TV.
Switch on your TV.
Tune your TV.
View TV programmes.

 

 

VIDEO

TV

 

 

 

/

/

L

MEMORY STICK

 

DIGITA

 

 

 

 

1

 

2

 

3

 

 

 

4

 

5

 

6

 

 

 

7

 

8

 

9

 

 

 

 

 

0

 

 

GUIDE

TV

D

 

 

VTR

 

 

 

VD

 

MODE

 

 

 

 

 

 

 

 

INDEX

PROG

MENU

RF Loopthrough cable
Batteries
Connecting an aerial only

2

3

Existing

3

 

VCR

1

aerial lead

RF loopthrough cable (supplied)

1.

Connect your existing aerial lead to the digital socket marked

 

 

on the rear of

 

 

 

2.

the TV as shown.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connect the supplied RF loopthrough cable from the socket marked

 

to the

 

 

 

analogue socket marked

 

 

 

.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connecting an aerial and VCR

Quick Start Guide

Remote Control

2

Inserting batteries into

the remote control

 

RF lead

 

 

(not supplied)

 

Scart lead

 

 

(not supplied)

 

 

VCR

 

1.

Connect your existing aerial lead to the digital socket marked

on the rear of the
TV as shown.

 

 

 

1

Place a coin in the slot at the bottom of the remote control. Turn anti clockwise to release the battery compartment.

2

Insert the batteries as indicated in the battery compartment.

3

Replace the battery compartment and lock in place by twisting the coin clockwise in the slot.

2.

Connect the supplied RF loopthrough cable from the lower socket marked

 

 

 

on

 

 

 

 

 

 

the TV to the RF IN socket on your VCR.
3. Connect a lead from the RF OUT socket of your VCR to the analogue socket
marked on the TV.

4.

Connect a scart lead from the socket marked

3

s

3

on the rear of the TV to

 

 

 

the scart socket on your VCR (refer to your VCR instruction manual).

5.

Connect the VCR to the mains socket and switch on.

 

6.

Insert a pre-recorded tape into the VCR and press the ‘PLAY’ button. This enables

the TV to locate and store the video channel during the ‘Automatically tuning the

 

Always remember to dispose of batteries in an environmentally friendly way.

4-090-228-01

TV’ procedure.