To control other TVs with the remote

You can control the volume, input source, programme position, and power switch of non-Sony TVs as well.

If your TV is listed in the table below, set the appropriate manufacturer’s code.

b

If you enter a new code number, the code number previously entered will be erased.

1While holding down TV [/1, enter the TV’s manufacturer code using the number buttons.

For instance, to enter “09,” press “0” then “9.”

Code numbers of controllable TVs

If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.

Manufacturer

Code number

Sony

01 (default)

Hitachi

24

JVC

33

LG/Goldstar

76

Panasonic

17, 49

Philips

06, 08, 72

Samsung

71

Sharp

29

Toshiba

38

 

 

2Release TV [/1.

Step 7: Easy Setup

Follow the steps below to make the minimum number of basic adjustments for using the player. If you do not complete Easy Setup, it will appear each time you turn on your player.

Make the settings below in the following order.

When turned on for the first time

Wait for a short while before the player turns on and starts Easy Setup.

[/1

TV [/1

 

</M/m/,,

RETURN

ENTER

 

HOME

 

1 Turn on the TV.

2 Press [/1 to turn on the player.

The player turns on after a moment.

3 Switch the input selector on your TV so that the signal from the player appears on your TV screen.

The display for OSD language selection appears.

•If the display for OSD language selection does not appear

Press HOME, and select “Easy Setup” in the “Setup” setup (page 53). Then, select “Start,” and press ENTER.

Settings and Hookups

,continued 27