Charging the unit

The unit contains a rechargeable Lithium-Ion battery, which should be charged before using for the first time.

1Open the cover of the USB () jack.

2Connect the supplied USB () cable to the unit, and then connect the other end to a computer.

When connecting, confirm the

direction of as in the illustration, and then insert the connector.

Charging starts when the unit and the computer are connected. Make sure that the indicator (red) lights up. Charging is completed in about 4 hours* and the indicator (red) goes off automatically.

*Time required for empty battery to recharge.

Notes

If this unit is not used for a long time, the indicator (red) may not light up when you connect the USB cable to charge this unit. In this case, do not disconnect the USB cable from the unit and wait until the indicator (red) lights up.

When you close the cover of the USB () jack after charging, push the cover thoroughly until the tab is full inserted.

For system requirements for a personal computer that can charge the battery using USB, see the “Specifications” (page 27).

Tips

If the USB cable is connected to a computer while the unit is turned on, the unit will be turned off automatically.

To charge the unit from an AC outlet, use USB charging AC Power Adaptor AC- U50AD (sold separately*). For details, refer to the manuals supplied with the USB charging AC Power Adaptor.

This unit cannot be turned on while charging.

*The above optional accessory is not provided in some areas.

US