20 GB
Viewing pictures from connected equipment

Turn on the connected equipment, then

perform one of the following operation.

For an auto-tuned VCR page7

In analogue mode, press PROG +/–, or the number

buttons, to select the video channel.

For other connected equipment

Press to display the connected equipment list.

Press F/f to select the desired input source, then

press . (The highlighted item is selected if two

seconds pass without any operation after pressing F/

f.)

For a USB device

See page21.

~
• Be sure to use only an authorised HDMI cable bearing
the HDMI logo. We recommend that you use a Sony
HDMI cable.
• When HDMI control compatible equipment is
connected, communication with the connected
equipment is supported. Refer to page22 to set up this
communication.
Symbol on the
screen Description
Component To see the equipment connected to
A.
HDMI1,
HDMI2,
HDMI3 or
HDMI4
HDMI IN 1, HDMI IN 2, HDMI IN
3 or HDMI IN 4
To see the equipment connected to
B, C, D or L.
Digital video and audio signals are
input from the connected equipment.
If the equipment has a DVI socket,
connect the DVI socket to the
HDMI IN 1 socket through a DVI-
HDMI adaptor interface (not
supplied), and connect the
equipment’s audio out sockets to the
audio in sockets in the HDMI IN 1
sockets.
Connect to the HDMI IN 2 socket,
to view photographs or screen
images from a PC or digital video
camera.
AV1
To see the equipment connected to
E.
AV2
To see the equipment connected to
F.
PC To see the equipment connected to
H.
z
• It is recommended to use a PC cable
with ferrites like the “Connector, D-
sub 15” (ref. 1-793-504-11,
available in Sony Service Centre), or
equivalent.
USB To see the equipment connected to
K.
You can enjoy photo/music/video
files stored in a Sony digital still
camera or camcorder (page21).
AV3 To see the equipment connected to
M.
When connecting mono equipment,
connect to the AV3 L socket.

To con nect Do t his

Conditional
Access Module
(CAM) J
To use Pay Per View services.
For details, refer to the instruction
manual supplied with your CAM.
Turn off the TV when inserting or
removing your CAM.
~
• CAM is not supported in some
countries/regions. Check with your
authorised dealer.
Hi-Fi audio
equipment G
Connect to the audio output sockets
to listen to the sound from the
TV on Hi-Fi audio equipment.
Audio level of the external speakers
can be modified by pressing the
volume buttons on the remote control.
DIGITAL
AUDIO OUT
(OPTICAL) I
Use an optical audio cable.
Headphones
N
Connect to the i socket to listen to
sound from the TV on headphones.
Symbol on the
screen Description
070MEN.fm Page 20 Thursday, December 10, 2009 11:57 AM