39
Recording/Playback
GB

When you connect with HDMI cable

Use an HDMI cable with the HDMI logo.
Use an HDMI mini connector on one end
(for the camcorder), and a plug suitable for
connecting your TV on the other end.
Copyright-protected images are not output
from the HDMI OUT jack of your camcorder.
Some TVs may not function correctly (e.g., no
sound or image) with this connection.
Do not connect the camcorder HDMI OUT
jack to an external device HDMI OUT jack, as
malfunction may result.

When you connect with A/V

connecting cable with S VIDEO

When the S VIDEO plug (S VIDEO channel)
is connected, audio signals are not output. To
output audio signals, connect the white and red
plugs to the audio input jack of your TV.
This connection produces higher resolution
images compared with the A/V connecting
cable.
Notes
When you play back standard definition image
quality (STD) movies on a 4:3 TV that is not
compatible with the 16:9 signal, record movies
with 4:3 aspect ratio. Touch (MENU)
[Show others] [OTHER REC SET]
(under [SHOOTING SET] category)
[WIDE SELECT] [4:3]
(p. 70).

If your TV/VCR has a 21-pin adaptor

(EUROCONNECTOR)

Use a 21-pin adaptor (sold separately) to

view playback pictures.

Tips
If you connect your camcorder to the TV using
more than one type of cable to output images,
the order of priority of the TV input jacks is as
follows:
HDMI component S VIDEO video
HDMI (High Definition Multimedia Interface)
is an interface to send both video/audio signals.
The HDMI OUT jack outputs high quality
images and digital audio.
Using “BRAVIA” Sync

You can operate your camcorder with

the remote commander of your TV by

connecting your camcorder to a “BRAVIA”

Sync compatible TV launched in 2008 or

later with the HDMI cable.

You can operate the menu of your

camcorder by pressing the SYNC MENU

button of the remote commander of your

TV. You can display index screens such

as VISUAL INDEX, play selected movies

or display selected photos by pressing up/

down/left/right/enter buttons of the remote

commander of your TV.

Notes
There may be some operations you cannot do
with the remote commander.
To set your camcorder, touch (MENU)
[Show others] [OTHER SETTINGS]
(under [GENERAL SET] category)
[CTRL FOR HDMI] [ON] (the default
setting) .
Also set your TV. Refer to the instruction
manual of the TV for details.
The operation of “BRAVIA” Sync differs
according to each model of BRAVIA. Refer to
the instruction manual of your TV for details.
Tips
If you turn off the TV, your camcorder is turned
off simultaneously.
TV/VCR