87
Additional information
GB
(Battery level warning)
Slow flashing
The battery pack is nearly used up.
Depending on the operating environment or
battery conditions, may flash, even if there
are about 20 minutes remaining.
(Warning indicator pertaining to battery pack temperature)
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
(High temperature warning)
Slow flashing
The temperature of your camcorder is getting
higher. Turn off your camcorder and leave it
for a while in a cool place.
Fast flashing
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
(Low temperature warning)
Fast flashing
The temperature of your camcorder is
extremely low. Make the camcorder warm.
(Warning indicator pertaining to memory card)
Slow flashing
Free spaces for recording images are running
out. For the type of memory card you can use
with your camcorder, see page 18.
No memory card is inserted (p. 18).
Fast flashing
There are not enough free spaces for recording
images. After storing the images on other
media (p. 49), delete unnecessary images, or
format the memory card (p. 74).
The image data base file may be damaged.
Check the data base file by touching
(MENU) [Show others] [REPAIR
IMG.DB F.] (under [MANAGE MEDIA]
category) the recording medium (HDR-
CX116E/CX150E/CX155E/XR150E/XR155E).
The memory card is damaged.
(Warning indicators pertaining to memory card formatting)
The memory card is damaged.
The memory card is not formatted correctly
(p. 74).
(Warning indicator pertaining to incompatible memory card)
Incompatible memory card is inserted (p. 18).
(Warning indicator pertaining to the write-protect of the memory card)
Access to the memory card was restricted on
another device.
(Warning indicator pertaining to camera-shake warning)
The camcorder is unsteady, so camera-shake
easily occurs. Hold the camcorder steady with
both hands and record the image. However,
note that the camera-shake warning indicator
does not disappear.
(Warning indicator pertaining to drop sensor)
The drop sensor function (p. 79) is activated,
and has detected that the camcorder has
been dropped. Therefore, the camcorder is
taking steps to protect the internal hard disk.
Recording/playback may be disabled as a
result.
The drop sensor function does not guarantee
the protection of the internal hard disk under
all possible situations. Use the camcorder
under stable conditions.