Sony 4-174-990-13(1) 1, 2, 3

4GB

Setting Up

Attaching the Table-Top

Stand

1Refer to the supplied Table-Top Stand

leaflet for proper attachment for some

TV models.

2Place the TV set on the Table-Top

Stand.

3Fix the TV to the Table-Top Stand

according to the arrow marks that

guide the screw holes using the

supplied screws.

•If using an electric screwdriver, set the tightening

torque at approximately 15 kgf·cm {1.5 N·m}.

Adjusting the viewing angle of

the TV (HX703 and NX503

models only)

This TV can be adjusted within the angles

shown below.

•To return to 0°, reverse the above procedure.

Remove screw as

shown.

6º0º

Install screw into

the top screw hole

of the Table-Top

Stand.

Slide in.Lift up and tilt.

Contents

Main NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM How to replace the fuse Introduction Notes on Digital TV function FUSE Table of Contents Setting Up Watching TV Additional Information Checking the accessories 1 2 3 Adjusting the viewing angle of the TV (HX703 and NX503 models only) 1 2 3 Bundling the cables Performing the initial set-up 1 outlet (mains socket). 4 2 ENERGY SAVING SWITCH setting is on (z). Detaching the Table-Top Stand from the TV Watching TV To watch programmes To utilise the TVs features 1 2 3 1 2 Troubleshooting 1 break. 2 your dealer or Sony service centre of how the indicator flashes (number of flashes). 1 2 Specifications Page Design and specifications are subject to change without notice. Installing the Accessories (Wall-Mount Bracket) TV installation dimensions table Screen centre point Screw and Hook locations diagram/table Safety Information Installation/Set-up Installation Transporting Ventilation Precautions Viewing the TV LCD Screen Handling and cleaning the screen surface/cabinet of the TV set Optional Equipment