Sony CA-TX50, 50P WARNING

To prevent fire or shock hazard, do not expose

the unit to rain or moisture.

To avoid electrical shock, do not open the

cabinet. Refer servicing to qualified personnel

only.

This equipment has been tested and found to comply

with the limits for a Class A digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference when the equipment is operated in a

commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction

manual, may cause harmful interference to radio

communications. Operation of this equipment in a

residential area is likely to cause harmful interference in

which case the user will be required to correct the

interference at his own expense.

You are cautioned that any changes or modifications not

expressly approved in this manual could void your

authority to operate this equipment.

The shielded interface cable recommended in this

manual must be used with this equipment in order to

comply with the limits for a digital device pursuant to

Subpart B of Part 15 of FCC Rules.

This product with the CE marking complies with both

the EMC Directive (89/336/EEC) and the Low Voltage

Directive (73/23/EEC) issued by the Commission of the

European Community.

Compliance with these directives implies conformity to

the following European standards:

• EN60950: Product Safety

• EN55103-1: Electromagnetic Interference (Emission)

• EN55103-2: Electromagnetic Susceptibility

(Immunity)

This product is intended for use in the following

Electromagnetic Environment (s):

E1 (residential), E2 (commercial and light industrial),

E3 (urban outdoors) and E4 (controlled EMC

environment, ex. TV studio).

WARNING