To change the color mode, press the Color Mode button on the remote control until you see the mode you want. The currently selected setting appears in the upper right corner of the screen. You can also use the projector menu system to change the color mode in the Image menu (see page 54).
Adjusting the Volume
You can use the buttons on the remote control or projector to increase or decrease the volume the projector’s 
button to increase the volume, or the 
button to decrease it. A volume gauge appears on the screen while the volume is being adjusted.
Volume controls
Shutting Down the Projector
When you’ve finished using the projector, follow the recommended procedure to shut it down.
1.If you’re using a computer, shut it down first; otherwise you may not be able to see your computer’s display to shut it down properly.
2.To turn off the projector, press the P Power button on the projector or remote control.
You see this confirmation message: (If you don’t want to turn it off, press any other button or wait a few seconds until it disappears.)
note
You can also adjust the volume using the projector’s Settings menu. See page 58 for details.
note
When the projector has not received any input signals for 30 minutes, it automatically turns off the projector lamp and enters “sleep mode.” This conserves electricity, cools the projector, and extends the life of the lamp. If you are done using the projector, unplug the power cord. If you want to start projecting again, press the P Power button. You can turn sleep mode on or off through the Extended menu. See page 61.
Projecting 41