2 Determine which connection method you want to use, and then adjust the jumper.

Depending on whether you want to connect the drive as MASTER or SLAVE, place the jumper on the pins, as illustrated below.

If you are unsure of the appropriate jumper setting, see “Appropriate Jumper Settings” on page 15.

 

 

 

 

 

 

CS EL

 

 

 

 

 

 

 

CS EL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SLAVE

 

 

 

 

 

 

 

SLAVE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MASTER

 

 

 

 

 

 

 

MASTER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Jumper

Jumper

Setup

Notes

•If installing the drive to replace one using the CSEL jumper setting, place the jumper on the CSEL pins of the drive before installing it.

•Only place the jumper vertically, as illustrated. Placing the jumper horizontally may damage the drive and/or cause malfunctions.

11