Sony BDP - S300 Started Getting, To control other TVs with the remote, If you want to control your TV with the supplied remote, Note, You can, By pressing, Code number, 06

Remove the batteries from the remote.

If you want to control your TV with the supplied remote

You can control the volume, input source, and power switch of your Sony TV with the supplied remote.

TV

TV \/1

	DIMMER	DISPLAY	t
	1	2	3
Number	4	5	6
buttons	7	8	9
			VIDEO
		0	FORMAT
	CLEAR
	AUDIO	SUBTITLE	ANGLE
	RED GREEN YELLOW BLUE
	SYSTEM		TOP
	MENU		MENU

POP UP/

RETURNMENU

PLAY MODE

	PROG
%	PROG +/–

2+/–

By pressing	You can
TV [/1	Turn the TV on or off.
2 +/–	Adjust the volume of the TV.
t	Switch the TV’s input source between the
	TV and other input sources.
PROG +/–	Select the channel up and down.
%	Mute the sound (for Sony TV only).

To control other TVs with the remote

You can control the volume, input source, and power switch of non-Sony TVs as well.

If your TV is listed in the table below, set the appropriate manufacturer’s code.

1 While holding down TV [/1, press the number buttons to select your TV manufacturer’s code (see the table below).

2 Release TV [/1.◆Code numbers of controllable TVs

If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.

Manufacturer	Code number
Sony	01 (default)
Aiwa	01
Grundig	11
Hitachi	23, 24, 72
Loewe	06, 45
Nokia	15, 16, 69, 73
Panasonic	17, 49
Philips	06, 07, 08, 23, 45, 72
Saba	12, 13, 36, 43, 74, 75
Samsung	06, 22, 23, 71, 72
Sanyo	25
Sharp	29
Telefunken	12, 13, 36, 43, 74, 75
Thomson	12, 13, 43, 74, 75
Toshiba	38
LG	06
JVC	33

◆To return the remote to its default settings

1

2 Re-insert the batteries while pressing down 1, 2, and 3 of the number buttons.3 Wait for a few seconds.

Note

Depending on the connected unit, you may not be able to control your TV using all or some of the buttons on the supplied remote.

Started Getting

17