Step 6: Easy Setup

Follow the steps below to make the minimum number of basic adjustments for using the player. If you do not complete Easy Setup, it will appear each time you turn on your player.

Make the settings below in the following order.When turned on for the first time

Wait about 90 seconds before the player turns on and starts Easy Setup. The start-up time will be much shorter once Easy Setup is completed.

TV

"/1

DIMMER DISPLAY

1 2 3

4 5 6

7 8 9

VIDEO

FORMAT

CLEAR 0

AUDIO SUBTITLE ANGLE

RED GREEN YELLOW BLUE

SYSTEMTOP

MENUMENU

</M/m/,,

ENTER

POP UP/

RETURNMENU

aTurn on the TV.bPress [/1 to turn on the player.The player turns on after a moment.

cSwitch the input selector on your TV so that the signal from the player appears on your TV screen.

If the display for OSD language selection does not appear, select “Start” of “Easy Setup” in “Options” Setup (page 52).

dSelect the OSD language you want to display, and press ENTER.

Easy Setup

Language

English

Français

Deutsch

Italiano

Español

Select the on-screen display language. Audio, subtitle and BD/DVD menu language options will be set to the same language as this.

Confirm SYSTEM MENU Exit

This will determine the Audio, Subtitle and BD/ DVD menu languages as well.
eSelect “Start,” and press ENTER to start “Easy Setup.”

Easy Setup

Before using, make some simple settings for the BD player.

Start

Cancel

Please use the Initial Setup if you want to make more detailed settings.

Use to select then press ENTER.

Confirm SYSTEM MENU Exit

◆If the above display does not appear

Go to step 6. This display appears only when the player is turned on for the first time.

fSelect the video output format for the connected TV, and press ENTER.For details about the video output, see page 46.◆ When using the HDMI OUT jack

Easy Setup

Output Video Format

Auto 576i/480i 576p/480p 720p 1080i 1080p Source Direct

Select [Auto] to automatically match the video output format with the HDMI-connected TV.

Confirm SYSTEM MENU Exit

Select from “Auto,” “576i/480i,” “576p/480p,” “720p,” “1080i,” “1080p,” or “Source Direct,” then go to step 8. “TV Type” in step 7 will be set to “16:9” (wide screen).

◆When using the jacks other than the HDMI OUT jack

Easy Setup

Output Video Format

S-Video/Video only 576i/480i 576p/480p

720p

1080i Don't Know

Select [Auto] to automatically match the video output format with the HDMI-connected TV.

Confirm SYSTEM MENU Exit

Select from “S-Video/Video only,” “576i/480i,” “576p/480p,” “720p,” “1080i” or “Don’t Know.” If you select “720p” or “1080i,” go to step 8. “TV Type” in step 7 will be set to “16:9” (wide screen).

18