Sony BX58, S580, BDP-S480 USB device, BRAVIA Internet Video, Network connection Control for HDMI (BRAVIA Sync)

27
Additional Information
,The player cannot play a recorded disc that
is not correctly finalized.
,The region code on the BD or DVD does
not match the player.
The player does not detect a USB device
connected to the player.
,Make sure that the USB device is securely
connected to the USB jack.
,Check if the USB device or a cable is
damaged.
,Check if the USB device is on.
,If the USB device is connected via a USB
hub, connect the USB device directly to the
player.
The picture/sound is poor/certain
programs display a loss of detail,
especially during fast-motion or dark
scenes.
,Picture/sound quality may be poor
depending on Internet content providers.
,Picture/sound quality may be improved by
changing the connection speed. We
recommend a connection speed of at least
2.5Mbps for standard definition video
(10Mbps for high definition video).
,Not all videos will contain sound.
The picture is small.
,Press M to zoom in.
The player cannot connect to the network.
,Check the network connection (page12)
and the network settings (page25).
You cannot connect your PC to the Internet
after [Wi-Fi Protected Setup (WPS)] is
performed.
,The wireless settings of the router may
change automatically if you use the Wi-Fi
Protected Setup function before adjusting
the settings of the router. In this case,
change the wireless settings of your PC
accordingly.
You cannot connect the player to the
wireless LAN router.
,Check if the wireless LAN router is on.
,Depending on the surrounding
environment, such as the wall material,
radio wave receiving condition, or obstacles
between the player and the wireless LAN
router, the communication distance may be
shortened. Move the player and the wireless
LAN router closer to each other.
,Devices that use a 2.4 GHz frequency band,
such as a microwave, Bluetooth, or digital
cordless device, may interrupt the
communication. Move the player away
from such devices, or turn off such devices.
The desired wireless router is not
detected even if [Scan] is performed.
,Press RETURN to return to the previous
screen, and try [Scan] again. If the desired
wireless router is still not detected, press
RETURN to select [Manual registration].
The message [A new software version is
available. Please go to the “Setup”
section of the menu and select “Network
update” to perform the update.] appears
on the screen when turning the player on.
,See [Network Update] (page21) to update
the player to a newer software version.
You cannot start the PARTY STREAMING
function.
,Check that [Party Auto Start] is set to [On]
in [Network Settings] (page25).
The [Control for HDMI] function does not
work (BRAVIA Sync).
,Check that [Control for HDMI] is set to
[On] (page24).
,If you change the HDMI connection, turn
the player off and on again.
,If power failure occurs, set [Control for
HDMI] to [Off], then set [Control for
HDMI] to [On] (page24).
,Check the following and refer to the
instruction manual supplied with the
component.
– the connected component is compatible
with the [Control for HDMI] function.
– the connected component’s setting for
the [Control for HDMI] function is
correct.
USB device
BRAVIA Internet Video
Network connection Control for HDMI (BRAVIA Sync)
,continued