23
Hookups and Settings
z
Check the following settings:
– “Audio Output Priority” is set to “HDMI” in the
“Audio Settings” setup (page 54).
– “Audio (HDMI)” is set to “Auto” in the “Audio
Settings” setup (page 57).
b
Not all HDMI-compatible AV amplifiers
(receivers) accept 8ch Linear PCM signals. Refer as
well to instruction manual supplied with the
connected AV amplifier (receiver).
If your AV amplifier (receiver) has a Dolby*1 Digital, Dolby Pro Logic, or DTS*2 decoder and
a digital input jack, you can enjoy Dolby Digital (5.1ch), Dolby Pro Logic (4.0ch), or DTS
(5.1ch) surround effects.
1Connect the digital jack of the player
and your AV amplifier (receiver).
2Set “Audio Output Priority” to
“Coaxial/Optical” in the “Audio
Settings” setup (page 54).
3Make the appropriate settings in
“Dolby Digital” and “DTS” under the
“Audio Settings” setup (page 57).
Otherwise, no sound or a loud noise will
come from your speakers.

Connecting to digital jacks (OPTICAL/COAXIAL)

AV amplifier (receiver)
Coaxial digital cable
(not supplied)
Blu-ray Disc/DVD player
Optical digital cable
(not supplied)
or
: Signal flow
,continued