29
Additional Information
Additional InformationTroubleshooting
If you experience any of the following
difficulties while using the player, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer.

There is no picture or the picture is not

output correctly.

,Check that all the connecting cables are
securely connected (page12).
,Switch the input selector on your TV to
display the signal from the player.
,Reset the video output resolution to the
lowest resolution by pressing x on the
player for more than 10 seconds.
,For HDMI connections, try the following:
1Turn the player off and on again. 2Turn
the connected equipment off and on again.
3Disconnect and then reconnect the HDMI
cable.
,The HDMI OUT jack is connected to a DVI
device that does not support copyright
protection technology.
,For HDMI connections, check the “Output
Video Format” settings in the “Screen
Settings” setup (page 23).
,When the analogue signals are also output,
set “BD/DVD-ROM 1080/24p Output” to
“Off” in the “Screen Settings” setup
(page23).
,For BD-ROMs, check the “BD/DVD-ROM
1080/24p Output” setting in the “Screen
Settings” setup (page 23).

The display language on the screen

switches automatically when connected to

the HDMI OUT jack.

,When “Control for HDMI” is set to “On”
(page26), the display la nguage on the
screen automatically switches according to
the language setting of the connected TV (if
you change the setting on your TV, etc.).

Picture

,continued