11GB

A"/1 (Power)

Turns the surround amplifier on/off.

BS-AIR/STANDBY indicator

You can check the status of wireless

transmission of surround speaker audio

signals between the main unit and surround

amplifier.

CS-AIR ID switch

Selects the S-AIR ID.

DPAIRING button

Starts pairing.

EPAIRING indicator

Indicates the pairing status.

FSURROUND SELECTOR switch

Selects the mode for the surround amplifier.

GSPEAKERS jacks

HWireless transceiver (EZW-RT10) slot

Surround amplifier
L R
SURROUND SELECTOR
SURROUND
PAIRING
ABC
SURROUND BACK
EZW-RT10
S-AIR ID
SPEAKERS
S-AIR/STANDBY
3-16
IMPEDANCE USE
Front panel Rear panel
Indicator Status
Turns green. Wireless transmission between
the main unit and the surround
amplifier is established
correctly and the main unit is
transmitting audio signals to
the surround speakers via the
surround amplifier.
Flashes green
quickly.
Wireless transmission between
the main unit and the surround
amplifier is established
correctly, but audio signals to
the surround speakers are not
being transmitted by the main
unit.
Flashes green
slowly.
Wireless transmission between
the main unit and the surround
amplifier is not set up
correctly.
Turns red. Wireless transmission between
the main unit and the surround
amplifier is not set up, or either
the surround amplifier or the
whole system is in standby
mode.
Turns off. The surround amplifier is
turned off.
Flashes orange. The wireless transceiver is not
inserted/not fully inserted/
inserted upside-down into the
wireless transceiver slot.
Flashes red. The surround am plifier’s
protection is active.
Indicator Status