Sony BDV-IZ1000W USB device, S-AIR

72GB

USB deviceS-AIR

Bonus contents or other data that

are contained in a BD-ROM

cannot be played.

•Try the following: 1 Remove the disc. 2 Turn the system off. 3 Remove and

reconnect the USB device (page33). 4 Turn the system on. 5 Insert the BD-

ROM with BONUSVIEW/BD-LIVE.

The unit does not work and

“CHILD LOCK” appears in the

front panel display when you

press any button on the unit.

•Set the child lock function to off (pag e54 ).

The system menu does not work. •Press HOME on the remote.

Symptom Problems and solutions

The USB device is not

recognized.

•Try the following: 1 Turn the system off. 2 Remove and reconnect the USB

device. 3 Turn the system on.

•Make sure that the USB device is securely connected to the (USB) port.

•Check if the USB device or a cable is damaged.

•Check if the USB device is on.

•If the USB device is connected via a USB hub, disconnect it and connect the

USB device directly to the unit.

Symptom Problems and solutions

Wireless transmission is not

activated. (The indicator of the

S-AIR sub unit flashes green

slowly or turns red.)

•Check that the wire less transceiver is inserted corre ctly into the unit and S-AIR

sub unit (page24).

•Confirm the S-AIR IDs of the unit and S-AIR sub unit (page 45).

•Confirm the pairing setting (page 47).

•See “If wireless transm ission is unstable” (page 48).

•Sound transmission is poor . Move the S-AIR sub unit so that the ind icator turns

green.

•Move the sy stem away from other w ireless devices.

•Avoid using any other wir eless devices.

There is no sound from the

S-AIR sub unit, noise is heard

from the S-AIR sub unit, or

sound from the S-AIR sub unit

skips.

•If you use another S-AIR main unit , place it more than 8 meters away from the

unit.

•Place the S-AIR main unit and S-AIR sub unit closer togeth er.

•Avoid use of equipment that generates electromagnetic energy, such as a

microwave oven.

•Place the S-AIR main unit and S-AIR sub unit away from other wirele ss

products.

•See “If wireless transm ission is unstable” (page 48).

•Change the S-AIR ID se ttings of the S-AIR main unit and S-AIR sub unit.

•Turn off the system and S-AIR sub unit, then turn them on.

Symptom Problems and solutions

Contents

Main CAUTION WARNING For the wireless transceiver (EZW- RT10/EZW-RT10A) Precautions On watching 3D video images Copyrights and Trademarks About These Operating Instructions Table of Contents Getting Started Playback Sound Adjustment Tuner Unpacking Page Index to Parts and Control Front panel Front panel display About the indications in the front panel display Rear panel A"/1 (Power) Turns the surround amplifier on/off. BS-AIR/STANDBY indicator CS-AIR ID switch Surround amplifier Remote control 2 qa wa 1 3 Page Step 1: Installing the System Getting Started AA Positioning the speakers A To add the optional surround back speakers CC 45 45 30 30 For assembling the speakers, refer to Speaker Installati on Guide (supplement). Assembling the speakers When installing the speakers on a wall 1 See the illustrations below. 3 2 Step 2: Connecting the System To connect speaker cords to the unit and surround amplifier Connecting the speakers Method 1: HDMI cable (A) connection Method 2: Component video cable (B) connection Connecting the TV (Video connection) About Audio Return Channel (ARC) Connecting the TV (Audio connection) When another component you wish to connect to the system has an HDMI OUT jack Connecting the other components When the component does not have an HDMI OUT jack Connecting the antenna (aerial) Inserting the wireless transceiver Step 3: Connecting to the Network To set the network settings USB Wireless Setup To set the network settings About wireless LAN security Step 4: Setting up the S-AIR Wireless System Before performing Step 4 1 2 3 Step 5: Performing the Easy Setup 2 3 4 5 To recall the Easy Setup Display Step 6: Selecting the Source You can select the playback source. Press FUNCTION repeatedly until the desired function appears in the front panel display. Step 7: Enjoying Surround Sound 2 3 About speaker output of each surround setting Selecting surround settings based on your listening preference Page Playing a Disc 1 Enjoying BONUSVIEW/BD-LIVE 2 3 Playing from a USB Device 1 2 3 Displaying the play information Enjoying an iPod Compatible iPod models 1 2 3 To operate the iPod using the remote Playing via a Network 1 2 3 To use the control panel 1 2 3 4 To join in a party 1 2 3 4 5 To close a party Available Options [Music] only Common options [Video] only [Photo] only 2 appears in the front panel display, then press or c. 3 the picture and sound. You can adjust from 0 ms to 300 ms in 25 ms increments. Selecting the Effect to Suit the Source Selecting the Audio Format, Multilingual Tracks, or Channel Sound Adjustment Enjoying Multiplex Broadcast Sound (DUAL MONO) Sound Adjustment Using the Sound Effect Changing the tonal balance 2 3 4 Listening to the Radio 1 Presetting radio stations 2 88.00 Using the Radio Data System (RDS) Selecting a radio station by inputting a frequency directly What is the Radio Data System? Page External Audio Device Using an S-AIR Product About S-AIR products To set the ID of the unit 1 2 4 5 6 8 9 4 5 6 Enjoying the systems sound in another room Enjoying the S-AIR receiver while the unit is in standby mode 1 2 3 4 5 6 3 4 5 6 8 Using the Control for HDMI Function for BRAVIA Sync 1 2 3 To set the [Control for HDMI] function of the system to on/off manually 4 5 6 Turning the system off in sync with the TV Watching BD/DVD by a single button press Calibrating the Appropriate Settings Automatically [Auto Calibration] 3 4 Setting the Maximum Volume Level of the System Setting the Speakers [Speaker Settings] 3 4 5 A A 1 2 Using the Sleep Timer To check the remaining time To change the remaining time Deactivating the Buttons on the Unit Controlling Your TV or Other Components with the Supplied Remote 1 button that matches the component you want to control. 2 in the following table. 3 4 5 6 7 3 4 5 6 7 8 Saving Power in Standby Mode Clearing all the preset and programmed remote codes from the remotes memory Using the Setup Display 3 [Remote Controller Setting Guide] Settings and Adjustments [Network Update] [Screen Settings] [Audio Settings] [BD/DVD Viewing Settings] [Parental Control Settings] [Music Settings] [System Settings] Page [Network Settings] [Easy Setup] [Resetting] Precautions On safety On power sources On placement On operation Notes about the Discs On handling discs On cleaning Troubleshooting Picture Power General Sound Page Operation Page USB device S-AIR BRAVIA Internet Video Network connection Other Playable Discs Discs that cannot be played Notes on discs Note on playback operations of a BD/DVD Note about double-layer BDs/ DVDs Playable Types of Files Video Music Photo Supported Audio Formats Audio formats supported by this system are as follows. a: Supported format. : Unsupported format. Video Output Resolution * Protected contents on DVDs are output at 480p/576p resolution. Specifications Amplifier Section Video Section PB/CB, PR/CR: 0.7Vp-p 75 ohms HDMI Section BD/DVD/Super Audio CD/CD System General Surround amplifier (TA-SA200WR) Wireless transceiver (EZW-RT10/EZW- RT10A) Language Code List The language spellings conform to the ISO 639: 1988 (E/F) standard. Parental Control/Area Code List Glossary Page Page Index Numerics A B C T U W