59GB
BDV-NF7220
4-485-836-E1(1)
D:\NORM'S JOB\SONY HA\SO130046\BDV-
N9200_7200_5200_E3200\4485836E11_ZE (NF7220)\100ADD.fm
masterpage:
Right
Additional Information
A disc does not start playing from the
beginning.
tResume play has been selected.
Press OPTIONS and select [Play
from start], then press .
Playback does not start from the
resume point where you last stopped
playing.
tThe resume point may be cleared
from memory depending on the
disc when
• you open the disc lid.
• you disconnect the USB device.
• you play other content.
• you turn off the main unit.
The language for the soundtrack/
subtitle or angles cannot be changed.
tTry using the BD’s or DVD’s menu.
tMultilingual tracks/subtitles or
multi-angles are not recorded on
the BD or DVD being played.
Bonus contents or other data that are
contained in a BD-ROM cannot be
played.
tTry the following:
1Remove the disc.
2Turn the system off.
3Remove and reconnect the USB
device (page2 7).
4Turn the system on.
5Insert the BD-ROM with
BONUSVIEW/BD-LIVE.
The USB device is not recognized.
tTry the following:
1Turn the system off.
2Remove and reconnect the USB
device.
3Turn the system on.
tMake sure that the USB device is
securely connected to the (USB)
port.
tCheck if the USB device or a cable is
damaged.
tCheck if the USB device is on.
tIf the USB device is connected via a
USB hub, disconnect it and connect
the USB device directly to the main
unit.
The picture/sound is poor/certain
programs display with a loss of detail,
especially during fast-motion or dark
scenes.
tPicture/sound quality may be poor
depending on Internet content
providers.
tPicture/sound quality may be
improved by changing the
connection speed. Sony
recommends a connection speed of
at least 2.5 Mbps for standard-
definition video and 10 Mbps for
high-definition video.
tNot all videos contain sound.
The picture is small.
tPress V to zoom in.
The [Control for HDMI] function does
not work (“BRAVIA” Sync).
tCheck that [Control for HDMI] is set
to [On] (page50).
tIf you change the HDMI connection,
turn the system off and on again.
tIf power failure occurs, set [Control
for HDMI] to [Off], then set [Control
for HDMI] to [On] (page50).
USB device
BRAVIA Internet Video
“BRAVIA” Sync ([Control for
HDMI])