58GB
BDV-NF7220
4-485-836-E1(1)
D:\NORM'S JOB\SONY HA\SO130046\BDV-
N9200_7200_5200_E3200\4485836E11_ZE (NF7220)\100ADD.fm
masterpage: Left
The Super Audio CD sound of an
equipment that is connected to the
HDMI (IN 1) or HDMI (IN 2) jack is not
output.
tHDMI (IN 1) and HDMI (IN 2) does not
accept an audio format that
contains copy protection. Connect
the analog audio output of the
equipment to the AUDIO IN (L/R)
jacks of the main unit.
There is no sound from the TV via the
HDMI (OUT) jack when using the Audio
Return Channel function.
tSet [Control for HDMI] in [HDMI
Settings] of [System Settings] to
[On] (page50). Also, set [Audio
Return Channel] in [HDMI Settings]
of [System Settings] to [Auto]
(page50).
tMake sure that your TV is
compatible with the Audio Return
Channel function.
tMake sure that an HDMI cable is
connected to a jack on your TV that
is compatible with the Audio Return
Channel function.
The system does not output sound of
TV programs correctly when connected
to a set-top box.
tSet [Audio Return Channel] in [HDMI
Settings] of [System Settings] to
[Off] (page50).
tCheck the connections (page 19).
Severe hum or noise is heard.
tMove your audio equipment away
from the TV.
tClean the disc.
The sound loses stereo effect when
you play a CD.
tSelect stereo sound by pressing
AUDIO (page3 7).
Distortion occurs in the sound of a
connected equipment.
tReduce the input level for the
connected equipment by setting
[Attenuation settings - AUDIO]
(page48).
A sudden loud music is heard.
tThe built-in or USB sound
demonstration is activated. Press
2 – to reduce the volume or press
x to stop the demonstration.
Radio stations cannot be tuned in.
tCheck that the antenna (aerial) is
connected securely. Adjust the
antenna (aerial) or connect an
external antenna (aerial) if
necessary.
tThe signal strength of the stations is
too weak (when tuning in with
automatic tuning). Use manual
tuning.
The disc does not play.
tThe region code on the BD/DVD
does not match the system.
tMoisture has condensed inside the
main unit and may cause damage
to the lenses. Remove the disc and
leave the main unit turned on for
about half an hour.
tThe system cannot play a recorded
disc that is not correctly finalized
(page61).
File names are not displayed correctly.
tThe system can only display ISO
8859-1 compliant character
formats. Other character formats
may be displayed differently.
tDepending on the writing software
used, the input characters may be
displayed differently.
Tuner
Playback