57US
BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100
4-446-733-12(1)
D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100
(PMRF 06)\4446733121_US (U2)\100ADD.fm
masterpage: Right
Additional Information
An image is not displayed on the
entire TV screen.
tCheck the setting of [TV Type] in
[Screen Settings] (page46).
tThe aspect ratio on the disc is fixed.
Color irregularity occurs on the TV
screen.
tIf the speakers are used with a CRT-
based TV or projector, install the
speakers at least 0.3 meters (1 foot)
from the TV set.
tIf the color irregularity persists, turn
off the TV set once, then turn it on after
15 to 30 minutes.
tMake sure that no magnetic object
(magnetic latch on a TV stand, health
care device, toy, etc.) is placed near the
speakers.
There is no sound.
tThe speaker cords are not connected
securely.
tCheck the speaker settings (page40).
There is no sound from the TV via the
HDMI (OUT) jack when using the
Audio Return Channel function.
tSet [Control for HDMI] in [HDMI
Settings] of [System Settings] to [On]
(page50). Also, set [Audio Return
Channel] in [HDMI Settings] of
[System Settings] to [Auto] (page50).
tMake sure that your TV is compatible
with the Audio Return Channel
function.
tMake sure that an HDMI cable is
connected to a jack on your TV that is
compatible with the Audio Return
Channel function.
The system does not output sound of
TV programs correctly when
connected to a set-top box.
tSet [Audio Return Channel] in [HDMI
Settings] of [System Settings] to [Off]
(page50).
tCheck the connections (page20).
Severe hum or noise is heard.
tMove your audio equipment away
from the TV.
tClean the disc.
The sound loses stereo effect when
you play a CD.
tSelect stereo sound by pressing
AUDIO (page37).
The sound outputs from the center
speaker only.
tDepending on the disc, the sound may
output from the center speaker only.
No sound or only a very low-level
sound is heard from the surround
speakers.
tCheck the speaker connections and
settings (pages 18, 40).
tCheck the sound mode setting
(page24).
tDepending on the source, the effect of
the surround speakers may be less
noticeable.
tA 2-channel source is being played.
Distortion occurs in the sound of a
connected equipment.
tReduce the input level for the
connected equipment by setting
[Attenuate - AUDIO] (page48).
A sudden loud music is heard.
tThe build-in sound demonstration is
activated. Press VOL – to reduce the
volume or press x to stop the
demonstration.
Sound