68US
SoundTuner
Playback
Symptom Problems and solutions
There is no sound. •The speaker cord is not connected securely.
•Check the speaker settings (page49).
The Super Audio CD sound of a
component that is connected to
the HDMI (IN 1) or HDMI (IN
2) jack is not output.
•HDMI (IN 1) and HDMI (IN 2) does not accept an audio format that contains
copy protection. Connect the analog audio output of the component to the
AUDIO (AUDIO IN L/R) jacks of the unit.
There is no sound from the TV
via the HDMI (OUT) jack when
using the Audio Return Channel
function.
•Set [Control for HDMI] in [HDMI Settings] of [System Settings] to [On]
(page61). Also, set [Au dio Return Channel] in [HDMI Settings] of [System
Settings] to [Auto] (page61).
•Make sure that your TV is com patible with the Audio Return Channel function.
•Make sure that an HDMI cable is connected to a jack on your TV that is
compatible with the Audio Return Channel function.
The system does not output
sound correctly when connected
to a set-top box.
•Set [Audio Return Channel] in [HDMI Settings] of [System Settings] to [Off]
(page61).
Severe hum or noise is heard. •Move your TV away from t he audio components.
•Clean the disc.
The sound loses stereo effect
when you play a CD.
•Select stereo sound by pressing AUDIO (page 43).
The sound comes from the center
speaker only.
•Depending on the disc, the sound may come from the center speaker only.
No sound or only a very low-
level sound is heard from the
surround speakers.
•Check the speaker connections and settings (pages 20, 49).
•Check the surround setting (page 31).
•Depending on the source, the effect of the surround speakers may be les s
noticeable.
•A 2 channel source is being played.
Distortion occurs in the sound of
a connected component.
•Reduce the input level for the connected com ponent by setting [Attenuate -
AUDIO] (page59).
Symptom Problems and solutions
Radio stations cannot be tuned
in.
•Check that the antenna ( aerial) is connected securely. Adjust the antenna
(aerial) or connect an external antenna (aeria l) if necessary.
•The signal strength of the stations is too weak (when tuni ng in with automatic
tuning). Use manual tuning.
Symptom Problems and solutions
The disc does not play. •The region code on the BD/DVD does not match the system.
•Moisture has condensed inside the unit and may cause damage to the lenses.
Remove the disc and leave the unit turned on for about half an hour.
•The system cannot play a recorded disc that is not correctly finalized (page71).
File names are not displayed
correctly.
•The system can only display ISO 8859-1-complian t character formats. Other
character formats may be displayed differently.
•Depending on the writing software used, the input characters may be displa yed
differently.