Telephone Recording
To record a telephone conversation, connect the telephone recording adaptor (not supplied)* to the TELEPHONE PICKUP jack. For further details, refer to the instruction manual of the telephone recording adaptor.
Rear
to the TELEPHONE PICKUP jack
Telephone Recording Adaptor (not supplied)
4 2
POWER
REC/ERASE 
13
1Set the POWER switch to ON.
The POWER lamp lights up.
2Insert a cassette. (See page 11.)
3Set the TAPE SPEED selector to 2.4 (cm/s) or 4.8 (cm/s). (See page 15.)
4Keep the TEL REC button pressed for more than a second.
Telephone recording begins. The REC/ERASE lamp flickers when the telephone recording adaptor picks up the sound.
To stop the tape
Press the s STOP button.
At the beginning of telephone recording The LTR signal is automatically recorded.
While the LTR signal is being recorded (for about 3 seconds), the unit cannot be stopped even though the s STOP button is pressed.
During telephone recording
Only the LTR button
23