!Á GENLOCK IN (external gen-lock signal input) connector (BNC type)Use to input an external gen-lock (generator lock) signal.!ª MONITOR connector (BNC type)

Outputs either a composite video (VBS) signal or a monitor signal (same as the signal output to the viewfinder of the BVP-550/550P) depending on an internal setting. The factory setting is for outputting the monitor signal.

For more informaton about the monitor signal, refer to the operation manual provided with the BVP-550/550P.

For more information about the internal setting, contact Sony service personnel.

!£ DC OUT (direct current output) connector (4- pin)

Outputs a d.c. power ranging from 10.5 V to 17 V with a maximum rated output current of 200 mA.

Note

Connecting equipment that consumes more than 200 mA may cause the CA-530 to malfunction.

!¢ DC IN (direct current input) connector (4-pin)Connect an AC adapter or battery case.

Note

When a VTR is connected to the CA-530 and an external power supply is connected to the DC IN connector of the CA-530, the power supplied from the DC IN connector is used.

5(E)